Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15058958
Spring, Front

1995-2002 GM

Customer Questions & Expert Answers (3)
GM 15058958 Spring, Front
  • Part Description
    Spring, Front Chassis; Coil Spring Set; Coil Springs
  • Position
    Front
  • Replaces
    15654771
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15058958 Spring, Front is Ref No. 15 in the diagram below

    2002 Oldsmobile Bravada Spring, Front Diagram for 15058958
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15058958

  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2002 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1996-2002 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15058958 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15058958 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair Coil Springs on GMC Jimmy? Posted by Customer
    A:
    Service and repair of the coil spring starts by removing the stabilizer shaft link between the lower Control Arm and shock absorber. Fix the coil spring remover and installer (J 23028-01) to a suitable jack extension so you can cradle the lower Control Arm bushings using this same tool. Your next step involves using the steering wheel to twist it into one position so the linkage clears the front pivot bolt of the lower Control Arm before you take out the bolts. First take off the lower Control Arm pivot bolts and nuts and then remove the lower Control Arm rear pivot bolt with the front pivot bolt. Use the coil spring remover and installer tool (J 23028-01) to reduce front coil spring tension before removing the front coil spring including its insulators while maintaining safe distances from both the lower Control Arm and lower Ball Joint assembly. During front coil spring installation position the spring to expose a single drain inspection hole but leave another drain hole partially or entirely uncovered by the spring. Use the coil spring remover and installer (J 23028-01) to lift and support the Control Arm during installation before seating the coil spring and insulator into the upper frame spring seat. The installation of the lower Control Arm to the frame depends on adequate steering linkage clearance achieved by applying specific bolt installation sequences. Install the lower Control Arm front pivot bolt then add its new nut before installing the lower Control Arm rear pivot bolt together with its new nut. During front suspension load conditions apply 115 nm (85 ft. Lbs.) to the lower Control Arm front pivot bolt and 98 nm (72 ft. Lbs.) to the lower Control Arm rear pivot bolt nut. Replace the coil spring remover and installer (J 23028-01) before you install the shock absorber and stabilizer shaft link to the lower Control Arm. Inspection of the front wheel alignment must be the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the steering wheel during the process for the 2001 GMC Jimmy? Posted by Customer
    A:
    Turn the steering wheel to one side to allow the steering linkage to clear the lower control arm front pivot bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coil Springs
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Spring, Front 15058958 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15058958 Spring, Front is available in the market under the name GM Coil Springs. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15058958 Spring, Front fits certain Chevrolet Blazer models, as well as GMC Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15058958 maintains top performance when functioning as the Spring, Front Chassis; Coil Spring Set; Coil Springs unit at its Front. The component 15058958 is constructed from durable material and its dimensions span 14.2 x 5.7 x 5.7 inches while weighing 10.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Spring, Front(Coil Type). The part 15058958 has available replacement options 15654771. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.