Make sure this part fits

GM 19208029
Strut

2006-2011 GM

Customer Questions & Expert Answers (13)
GM 19208029 Strut
GM 19208029 Strut
  • Part Description
    Strut Kit, Front and Rear Suspension; Air Spring to Coil Spring Conversion; Complete Suspension Assembly.
  • Position
    Front
  • Replaces
    15211372, 19208028, 15220434
  • Manufacturer
    General Motors
Make sure this part fits
$120.36 MSRP: $226.17
You Save: $105.81 (47%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19208029 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19208029 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Where should you make the first indentation on the shock absorber tube for the 2010 Buick Lucerne? Posted by Customer
    A:
    10 mm (0.4 in) from the bottom of the tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after drilling the first hole for the 2006 Buick Lucerne? Posted by Customer
    A:
    Create an indentation in the middle of the tube with a centerpunch and drill a second hole at the centerpunch mark with the same drill bit, again containing the escaping oil with shop towels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What size drill bit should be used to drill the hole in the shock absorber for the 2009 Buick Lucerne? Posted by Customer
    A:
    Use a 5 mm (3/16 in) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What comes after removing the upper shock absorber cover for the 2007 Buick Lucerne? Posted by Customer
    A:
    Remove the upper shock absorber retaining nuts and the upper shock absorber reinforcement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step in the process for the 2008 Buick Lucerne? Posted by Customer
    A:
    Install the tire and wheel, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What needs to be disconnected from the shock for the 2009 Buick Lucerne? Posted by Customer
    A:
    Disconnect the automatic level control air tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be removed to detach the shock from the control arm for the 2010 Cadillac DTS? Posted by Customer
    A:
    Remove the 2 bolts securing the shock to the control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be removed from the upper shock for the 2008 Cadillac DTS? Posted by Customer
    A:
    Remove the upper shock dust cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the lower shock bolts be tightened for the 2008 Cadillac DTS? Posted by Customer
    A:
    Install the lower shock bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should you wear to ensure safety while disposing of gas charged shock absorbers for the 2006 Cadillac DTS? Posted by Customer
    A:
    Safety glasses.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after reinstalling the wheel and tire for the 2007 Cadillac DTS? Posted by Customer
    A:
    Tighten the wheel nuts to 125 N.m (80 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the shock absorber (FE1, FE3) for the 2009 Cadillac DTS? Posted by Customer
    A:
    Raise the vehicle and support it securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut 19208029 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19208029 Strut is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19208029 Strut fits certain Cadillac DTS models, as well as Buick Lucerne models.
The original GM component designated by manufacturer part number 19208029 maintains top performance when functioning as the Strut Kit, Front and Rear Suspension; Air Spring to Coil Spring Conversion; Complete Suspension Assembly. unit at its Front. The component 19208029 is constructed from durable material and its dimensions span 28.5 x 10.7 x 10.6 inches while weighing 7.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19208029 has available replacement options 15211372, 19208028, 15220434. Each vehicle needs 2 units of the part marked as SKU 19208029. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.