Make sure this part fits

GM 19419352
Steering Gear

2008-2014 Cadillac CTS

Customer Questions & Expert Answers (4)
GM 19419352 Steering Gear
  • Part Description
    Gear Assembly, Steering
  • Replaces
    20962759, 25930833, 25980222, 22777701
  • Manufacturer
    General Motors
Make sure this part fits
$2107.18 MSRP: $2711.96
You Save: $604.78 (23%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19419352
    Part DescriptionGear Assembly, Steering
    Other NamesGear Assembly; Gear, Steering
    Item Dimensions58.5 x 12.1 x 11.5 inches
    Item Weight22.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces20962759, 25930833, 25980222, 22777701
    ManufacturerGeneral Motors
    SKU19419352
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2014 Cadillac CTSBase, Luxury, Performance, Premium, V6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19419352 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19419352 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Rack and Pinion in a rear-wheel drive on Cadillac CTS? Posted by Customer
    A:
    In order to replace the Rack And Pinion of a rear-wheel drive vehicle begin by installing the engine support fixture. First detach the front air deflector and position drain pans underneath the vehicle when necessary. Disconnect the lower intermediate Steering Shaft from the Rack And Pinion until you remove the steering linkage outer tie rods from steering knuckles and lower control arms from steering knuckles. Unbolt both power steering Rack And Pinion inlet tube bracket and all frame connection points that hold the inlet and outlet hoses before separating these hoses from the Rack And Pinion assembly. The installation process requires jackstand support of the front frame along with bolt removal from left and right side engine mounts and disruption of any electrical harnesses connected to the front frame and disconnection of the power steering Rack And Pinion solenoid electrical connector. A hoisted vehicle should slowly rise after removing front frame bolts until adequate space becomes available to extract the Rack And Pinion. Unglue the Rack And Pinion nuts and bolts and extract the Rack And Pinion from the front frame. To install the Rack And Pinion position it at the front frame before you place Rack And Pinion nuts and bolts in position and tighten them to 85 n.m (63 lb ft). Start mounting the engine bolts manually before installing front frame bolts on this step. Once installed, torque the engine mount bolts and restore power steering Rack And Pinion solenoid electrical connectivity along with front frame electrical harnesses. Reinstall the power steering inlet pipe bracket bolt with a torque of 22.5 n.m (17 lb ft). After attaching hose fasteners to the frame you must link lower control arms with steering knuckles before attaching steering linkage outer tie rods to steering knuckles. After cleaning off any remaining fluid from the lower intermediate Steering Shaft reconnect it to the Rack And Pinion while reinstalling the front air deflector. As a final step remove the engine support fixture before filling and bleeding the power steering system and performing front toe adjustment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be separated from the steering gear for the 2009 Cadillac CTS? Posted by Customer
    A:
    Separate the lower intermediate steering shaft from the steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    Q:
    What supports the front frame during the process for the 2008 Cadillac CTS? Posted by Customer
    A:
    Support the front frame with jackstands.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Rack And Pinion
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19419352, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19419352 Steering Gear. It is sometimes referred to as GM Rack And Pinion. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19419352 Steering Gear. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery