Make sure this part fits

GM 19177442
Outer Tie Rod, Driver Side

2008-2015 Cadillac CTS

Customer Questions & Expert Answers (4)
GM 19177442 Outer Tie Rod, Driver Side
GM 19177442 Outer Tie Rod, Driver Side
  • Part Description
    Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
  • Position
    Outer Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$168.39 MSRP: $277.39
You Save: $109.00 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2015 Cadillac CTSBase, Luxury, Performance, Premium, V, Vsport, Vsport Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19177442 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19177442 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the steering linkage outer tie rod on an all-wheel-drive on Cadillac CTS? Posted by Customer
    A:
    The first step to replace the steering linkage outer Tie Rod on all-wheel-drive vehicles is to take off the tire assembly together with its wheel. Then you should detach the steering linkage outer Tie Rod nut before throwing it away. The j-24319-b - steering linkage and Tie Rod puller should be used to separate the outer Tie Rod from the Steering Knuckle. Record the necessary number of whole turns required to take off the outer Tie Rod when you loosen its steering linkage inner Tie Rod nut. You should first separate the outer Tie Rod from the inner Tie Rod before discarding the inner Tie Rod nut. To install the new inner Tie Rod nut attach it to the outer Tie Rod with the same number of turns recorded when the outer Tie Rod was removed. Connect both parts of the linkage before attaching them to the Steering Knuckle by observing proper fastener procedures. Fasten a fresh outer Tie Rod nut at 35 nm (26 lb ft) pressure while afterwards adding an additional 110-degree twist. Put back the tire-wheel assembly to measure and adjust the front toe settings. Complete the procedure by torquing the steering linkage inner Tie Rod nut to 65 nm (48 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps after tightening the outer tie rod nut for the 2009 Cadillac CTS? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, adjust the front toe, and tighten the steering linkage inner tie rod nut to 65 Nm (48 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    Q:
    How do you disconnect the steering linkage outer tie rod from the steering knuckle for the 2008 Cadillac CTS? Posted by Customer
    A:
    Use puller (J 24319-B) to disconnect it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tie Rod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Outer Tie Rod, Driver Side 19177442 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19177442 Outer Tie Rod, Driver Side is available in the market under the name GM Tie Rod, Tie Rod End. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19177442 Outer Tie Rod, Driver Side fits certain Cadillac CTS models.
The original GM component designated by manufacturer part number 19177442 maintains top performance when functioning as the Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End unit at its Outer Driver Side. The component 19177442 is constructed from durable material and its dimensions span 9.0 x 5.0 x 2.8 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rod Kit, Steering Tie Rod Outer. The part 19177442 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.