Make sure this part fits

GM 88952118
Grip Handle, Gray

2003-2008 GM

Customer Questions & Expert Answers (15)
GM 88952118 Grip Handle, Gray
  • Part Description
    Handle, Rear Quarter And Roof Rail Assist
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2008 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88952118 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88952118 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you disconnect the lock cylinder rod for the 2003 Cadillac CTS? Posted by Customer
    A:
    Disconnect the lock cylinder rod from the door latch and the outside door handle rod by opening the retainer at the door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do to ensure proper alignment of the door handle assembly for the 2004 Cadillac CTS? Posted by Customer
    A:
    Slide the assembly towards the rear to engage the three tabs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed to take out the outside door handle for the 2003 Cadillac CTS? Posted by Customer
    A:
    Remove the outside door handle nuts through the access holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after removing the rear door trim panel for the 2005 Cadillac CTS? Posted by Customer
    A:
    Take out the fastener that secures the inside door handle to the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you install the new inside door handle for the 2004 Cadillac CTS? Posted by Customer
    A:
    Insert the inside door handle rod into the hole in the door handle assembly and rotate the assembly up towards the front of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the lock cylinder rod for the 2007 Cadillac CTS? Posted by Customer
    A:
    Disconnect it from the door latch and the outside door handle rod by opening the retainer at the door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the final step in securing the door handle for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the door handle fastener and tighten it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you disconnect the lock cylinder rod for the 2006 Cadillac CTS? Posted by Customer
    A:
    Disconnect it from the door latch and the outside door handle rod by opening the retainer at the door latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the next step after removing the cap for the 2006 Cadillac SRX? Posted by Customer
    A:
    Slightly open the door handle to remove the cap, then raise the outside door handle counterbalance weight and rock the handle outboard while sliding it rearward to remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What needs to be removed to access the outside door handle for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the outside door handle cap screw access plug and the screw securing the outside door handle cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done after installing the handle for the 2007 Cadillac SRX? Posted by Customer
    A:
    Slightly open the door handle to install the cap, secure it with the screw, and reinstall the outside door handle cap screw access plug.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the inside door handle from the trim panel for the 2004 Cadillac SRX? Posted by Customer
    A:
    Slide the handle towards the front of the vehicle to detach it from the trim panel and remove it from the door handle linkage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should be done before reinstalling the water deflector and door trim panel for the 2008 Cadillac SRX? Posted by Customer
    A:
    Inspect the door handle for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear side door outside handle for the 2007 Cadillac SRX? Posted by Customer
    A:
    Place the window in the full up position and remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Grip Handle, Gray 88952118 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88952118 Grip Handle, Gray is available in the market under the name GM Door Handle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88952118 Grip Handle, Gray fits certain Cadillac CTS, SRX models.
The original GM component designated by manufacturer part number 88952118 maintains top performance when functioning as the Handle, Rear Quarter And Roof Rail Assist unit. The component 88952118 is constructed from durable material and its dimensions span 15.5 x 4.6 x 4.5 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 88952118 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 88952118. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.