Make sure this part fits

GM 10289335
Handle

1997-2016 GM

Customer Questions & Expert Answers (11)
GM 10289335 Handle
GM 10289335 Handle
  • Part Description
    Handle, Hood Latch
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2006-2013 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, Police, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    1997-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP, SE6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10289335 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10289335 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the hood latch release cable retainers for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the retainers from the engine compartment side rail and pull back the carpet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What is the first step to replace the Hood Latch Release Cable for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Begin by opening the hood and removing the left front headlamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What are the final steps after reinstalling the air cleaner for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Reattach the front fender upper diagonal brace, connect the hood release cable to the hood latch, and reinstall the left front headlamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    How do you prevent the hood latch from locking during the replacement for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Block the hood latch to prevent locking until the new cable is installed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What should you do with the grommet during the process for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Remove the hood release cable grommet from the dash panel, noting the cable's routing before removing the cable from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What is the next step after connecting the cable to the hood release handle for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Install the carpet retainer, then pull the string and the hood release cable into the engine compartment and remove the string again.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    How do you prepare the hood release cable for installation for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the hood release cable from the hood release handle and tie a piece of string around the cable to facilitate installation through the passenger compartment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What should be done with the hood release cable grommet for the 2011 Chevrolet Impala? Posted by Customer
    A:
    Remove the hood release cable grommet from the dash panel, noting the routing of the cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    What are the final steps to complete the installation for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the hood release cable to the hood latch, reinstall the hood latch, and close the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    Q:
    How do you prepare the hood release cable for installation for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the hood release cable from the hood release handle and tie a piece of string around the cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hood Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Handle 10289335 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10289335 Handle is available in the market under the name GM Hood Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10289335 Handle fits certain Chevrolet Impala, Monte Carlo, Impala Limited models, as well as Buick LaCrosse. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 10289335 maintains top performance when functioning as the Handle, Hood Latch unit. The component 10289335 is constructed from durable material and its dimensions span 6.8 x 3.1 x 1.4 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 10289335 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.