Make sure this part fits

GM 22822466
Muffler & Pipe Hanger, Rear

2004-2013 GM

Customer Questions & Expert Answers (11)
GM 22822466 Muffler & Pipe Hanger, Rear
GM 22822466 Muffler & Pipe Hanger, Rear
  • Part Description
    Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger
  • Position
    Rear
  • Replaces
    10349562
  • Manufacturer
    General Motors
Make sure this part fits
$27.31 MSRP: $40.62
You Save: $13.31 (33%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22822466 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22822466 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Exhaust Muffler Exhaust Hanger on Chevrolet Corvette? Posted by Customer
    A:
    Proper removal of the Muffler according to the left or right side replacement process allows technicians to service the exhaust system insulator and bracket as well as the Muffler hanger. As a next step remove both Muffler hanger nuts followed by the removal of the hanger. You need to remove the push-on retainer and the hanger reinforcement in case of their necessity. The first step for implementation includes installing the hanger reinforcement when it was removed and also reattaching the push-on retainer. Place the Muffler hanger back and fasten the nuts while they reach an installation torque of 16 n.m (12 lb ft). The final step requires following the repair instructions for both the left and right sides during Muffler reinstallation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Address Issues with the Exhaust Hanger on Cadillac XLR? Posted by Customer
    A:
    Starting the Exhaust Pipe/Muffler hanger service requires Muffler removal by using the right or left side exhaust Muffler replacement procedures. Remove the Muffler hanger bolt before taking out the hanger after which you should remove the hanger itself. Starting with installing the hanger marks the beginning of installation. Pay attention to fastener safety measures to preserve vehicle integrity. Position the Muffler hanger onto its place before installing its bolt then secure the hanger nuts at 16 nm (12 lb ft) torque. Reinstall the Muffler according to the replacement instructions that pertain to the left or right side.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the Exhaust Hanger on Cadillac XLR? Posted by Customer
    A:
    The repair or servicing process for the Exhaust Pipe/muffler hanger starts with Muffler removal through left side or right side exhaust Muffler replacement procedures. Begin by removing the Muffler hanger bolt then remove the hanger which leads to taking out the hanger itself. Begin installation by first installing the hanger according to the fastener notice to avoid vehicle damage. Install the Muffler hanger with its bolt before securing the nuts on the Muffler hanger to 16 n.m (12 lb ft). After following the proper procedures complete the reinstall of the Muffler following left or right side criteria.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the hanger for the 2007 Cadillac XLR? Posted by Customer
    A:
    Install the muffler hanger and bolt, tightening the muffler hanger nuts to 16 N.m (12 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be removed after the muffler for the 2005 Cadillac XLR? Posted by Customer
    A:
    Remove the muffler hanger bolt and hanger.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What should be removed after the muffler for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Remove the muffler hanger nuts and hanger.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step after following the Fastener Notice for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Install the muffler hanger and nuts, tightening them to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Begin by reinstalling the hanger reinforcement if it was removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Begin by installing the hanger reinforcement if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    Q:
    What is the next step after removing the floor panel tunnel reinforcement for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Remove the upper exhaust pipe hanger bolts and the exhaust pipe hanger.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Hanger
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Muffler & Pipe Hanger, Rear 22822466 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22822466 Muffler & Pipe Hanger, Rear is available in the market under the name GM Exhaust Hanger. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22822466 Muffler & Pipe Hanger, Rear fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 22822466 maintains top performance when functioning as the Hanger Assembly-Exhaust Pipe Rear; Exhaust Hanger unit at its Rear. The component 22822466 is constructed from durable material and its dimensions span 5.7 x 3.1 x 2.6 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hanger, Exhaust Pipe. The part 22822466 has available replacement options 10349562. Each vehicle needs 4 units of the part marked as SKU 22822466. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.