Make sure this part fits

GM 15932613
Lower Hinge, Front

2003-2009 GM

Customer Questions & Expert Answers (14)
GM 15932613 Lower Hinge, Front
  • Part Description
    Hinge, Front Door Lower Hinge; Door Hinge
  • Position
    Front Lower
  • Replaces
    15163691, 25680443
  • Manufacturer
    General Motors
Make sure this part fits
$46.36 MSRP: $60.28
You Save: $13.92 (24%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15932613
    Part DescriptionHinge, Front Door Lower Hinge; Door Hinge
    Other NamesUpper Hinge; Hinge, Rear Side Door Lower Hinge; Hinge, Front Door Upper Hinge; Hinge, Door Hinge
    Item Dimensions4.7 x 4.4 x 2.2 inches
    Item Weight1.10 Pounds
    PositionFront Lower
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15163691, 25680443
    ManufacturerGeneral Motors
    SKU15932613
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15932613 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15932613 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front side door hinge on Cadillac CTS? Posted by Customer
    A:
    Failure to understand the replacement process of a front side Door Hinge would lead to installation difficulties. Beginners should start by removing push-in fasteners which secure the fender sound insulator to the front fender before extracting the fender sound insulator. Arbitrate the hinge position on the body before sustaining the door. Start by taking out the hinge bolts both from the body as well as from the door. Place the hinge using the body marks from removal and fasten it with body bolts which should be tightened to 25 n.m (18 lb ft). You should install the hinge to door bolts before screwing them into place with a torque value of 25 n.m (18 lb ft). Replace the fender sound insulator after the removal of the support. The correct alignment of door strikers serves to operate door latches properly; avoid using door strikers for door alignment since misaligned door adjustments will break the door latch and striker. The door requires adjustment before applying body color paint to cover any paint damage found on both hinge and bolt components.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after marking the hinge position for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the hinge bolts from the body and the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after supporting the door for the 2005 Cadillac CTS? Posted by Customer
    A:
    Mark the position of the hinge on the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the fender sound insulator for the 2003 Cadillac CTS? Posted by Customer
    A:
    Mark the position of the hinge on the body and support the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinge to the pillar for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the bolts and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for the hinge bolts for the 2009 Cadillac SRX? Posted by Customer
    A:
    Install the bolts and tighten them to 25 Nm (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after supporting the door for the 2005 Cadillac SRX? Posted by Customer
    A:
    Mark the position of the hinge on the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door hinge for the 2007 Cadillac SRX? Posted by Customer
    A:
    First, remove the push-in fasteners securing the fender sound insulator to the front fender and then take out the fender sound insulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the hinge be installed for the 2008 Cadillac SRX? Posted by Customer
    A:
    Align the hinge to the marks made on the body during removal and install the hinge to body bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do at the end of the process for the 2009 Cadillac SRX? Posted by Customer
    A:
    Adjust the door and touch up any paint damage to the hinge and bolts with body color paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done at the end of the process for the 2006 Cadillac SRX? Posted by Customer
    A:
    Adjust the door and touch up any paint damage to the hinge and bolts with body color paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the door hinge to the door for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Align the door hinge with the marks on the door pillar, install the bolts to the hinge pillar, and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the final steps after ensuring the door is aligned for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Reinstall the front fender, the front wheelhouse liner, and the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15932613, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15932613 Lower Hinge, Front. It is sometimes referred to as GM Door Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15932613 Lower Hinge, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery