Make sure this part fits

GM 22743771
Upper Hinge, Front Passenger Side

2000-2016 GM

Customer Questions & Expert Answers (17)
GM 22743771 Upper Hinge, Front Passenger Side
  • Part Description
    Hinge Assembly-Front Side Door Upper; Door Hinge
  • Position
    Front Upper Passenger Side
  • Replaces
    10323830, 10445131, 20963243, 25937753, 10419282, 10338711, 25774778
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2000-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22743771 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22743771 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you access the rear door hinges for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Open the front door to access the rear door hinges without opening the rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the sequence for removing the upper hinge bolts if the upper hinge is broken for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Remove the upper hinge bolts from the door side in the sequence (1, 4), followed by the upper hinge bolts from the hinge pillar side in the same sequence.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after applying masking tape for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Open and support the door, then clean the area around the hinge and mark its location with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after installing all the hinge bolts for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Remove the support from the door, inspect for proper operation, and take off the masking tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after applying masking tape for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Open and support the door, then clean the area around the hinge and mark its location with a grease pencil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you support the front door during the hinge replacement for the 2003 Chevrolet Impala? Posted by Customer
    A:
    Support the front door before removing the bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the bolts to the bodyside rear door hinge for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Tighten the bolts to 33 Nm (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the hinge locations for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Remove the bolts from the front doorside hinge and then the doorside hinge itself, followed by the bolts from the bodyside hinge and the bodyside hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the mounting surfaces of the hinges be prepared for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Clean the mounting surfaces of the hinges with a clean rag and mark the front door hinge locations on each surface with a grease pencil or suitable marker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the order of removing the bolts from the hinges for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the bolts from the doorside rear door hinge first, followed by the bolts from the bodyside rear door hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    Which hinge should be addressed first for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Start with the broken hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the hinge replacement process for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Install the door-side hinge bolts and tighten them to 33 Nm (24 lb ft), remove the door support, and inspect the door for proper operation and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front side door hinges for the 2011 Chevrolet Impala? Posted by Customer
    A:
    First, open and support the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the next step after marking the hinge locations for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Remove the bolts from the front doorside hinge and then the doorside hinge itself, followed by the bolts from the bodyside hinge and the bodyside hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the torque specification for tightening the bolts during installation for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Tighten the bolts to 33 N.m (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the rear door hinge for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Position the rear door hinge according to the alignment marks and install the bolts (1-5) to the bodyside rear door hinge, tightening them to 33 N.m (24 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Hinge, Front Passenger Side 22743771 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22743771 Upper Hinge, Front Passenger Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22743771 Upper Hinge, Front Passenger Side fits certain Chevrolet Impala, Impala Limited models, as well as Buick LaCrosse. Additionally, it is compatible with Pontiac Grand Prix models.
The original GM component designated by manufacturer part number 22743771 maintains top performance when functioning as the Hinge Assembly-Front Side Door Upper; Door Hinge unit at its Front Upper Passenger Side. The component 22743771 is constructed from durable material and its dimensions span 4.8 x 4.6 x 2.7 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge, Rear Side Door Upper Hinge; Hinge, Front Door Upper Hinge. The part 22743771 has available replacement options 10323830, 10445131, 20963243, 25937753, 10419282, 10338711, 25774778. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.