Make sure this part fits

GM 19366715
Flex Hose, Rear

2003-2007 Cadillac CTS

Customer Questions & Expert Answers (12)
GM 19366715 Flex Hose, Rear
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear
  • Replaces
    15933093, 19331546, 15257487, 15875848
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366715 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366715 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in replacing a brake pipe for the 2004 Cadillac CTS? Posted by Customer
    A:
    Inspect the area of the brake pipe to be replaced and release it from the retainers as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after raising the 2007 Cadillac CTS? Posted by Customer
    A:
    Remove the clutch hydraulic hose retaining clip from the clutch slave cylinder and disconnect the clutch hydraulic hose from the clutch slave cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after positioning the coolant surge tank for the 2005 Cadillac CTS? Posted by Customer
    A:
    Remove the clutch hydraulic hose retaining clip from the clutch master cylinder and cap or plug the exposed hose and clutch master cylinder fittings to prevent fluid loss and contamination before disconnecting the clutch hydraulic hose from the clutch master cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the first step to replace the hydraulic clutch hose for the 2006 Cadillac CTS? Posted by Customer
    A:
    Ensure that the coolant does not need to be drained or the coolant lines disconnected from the coolant surge tank; instead, remove the surge tank bolts and position the tank out of the way.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after connecting the BPMV to intermediate brake pipe fittings for the 2006 Cadillac CTS? Posted by Customer
    A:
    Remove the rubber plug from the brake hose to caliper bolt hole of the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What safety precautions should be followed for the 2007 Cadillac CTS? Posted by Customer
    A:
    Follow safety precautions regarding brake fluid irritants and use double-walled steel brake pipes to prevent system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is important to check during the installation of the intermediate brake hose assembly for the 2005 Cadillac CTS? Posted by Customer
    A:
    Ensure the brake hose is not twisted or kinked.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the brake hose from the frame assembly for the 2007 Cadillac CTS? Posted by Customer
    A:
    Remove the brake hose to caliper bolt from the brake caliper, then take the brake hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after raising for the 2003 Cadillac CTS? Posted by Customer
    A:
    The right tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the clutch hydraulic hose to the clutch slave cylinder for the 2003 Cadillac CTS? Posted by Customer
    A:
    Install the clutch hydraulic hose to the vehicle, aligning the locating tab with the notch in the slave cylinder hose fitting, and push the clutch hydraulic hose into the clutch slave cylinder until a "click" is heard.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What should be done after ensuring the coolant lines are intact for the 2004 Cadillac CTS? Posted by Customer
    A:
    Remove the surge tank bolts and move the coolant surge tank aside.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear 19366715 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366715 Flex Hose, Rear is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366715 Flex Hose, Rear fits certain Cadillac CTS models.
The original GM component designated by manufacturer part number 19366715 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear. The component 19366715 is constructed from durable material and its dimensions span 7.4 x 2.1 x 13.8 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366715 has available replacement options 15933093, 19331546, 15257487, 15875848. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.