Make sure this part fits

GM 19366671
Flex Hose, Rear

2006-2011 Cadillac DTS

Customer Questions & Expert Answers (7)
GM 19366671 Flex Hose, Rear
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear
  • Replaces
    15230029
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366671 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366671 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear brake line on Cadillac DTS? Posted by Customer
    A:
    To begin brake hose replacement start by lifting and stabilizing the vehicle. Afterwards remove its tire and wheel assembly. Remove every speck of dirt from brake hose and pipe maintenance points before adding a fitting cap to lock in clean brake fluid. Use a flat-bladed tool to detach the brake hose retainer from the brake hose before taking off the brake hose from the brake pipe fitting. Detach the brake hose from its bracket and brake hose bolt before taking off the brake caliper bolt and brake hose itself. Get rid of the two copper gaskets on the brake hose before plugging the brake caliper intake to stop brake fluid leakage and contamination. Place new copper brake hose gaskets on the brake caliper inlet port before you install them if required. Fits the brake hose bolt together with new gaskets before placing it into the brake caliper and tightening it to 40 n.m (30 lb ft) for jl9 and 45 n.m (33 lb ft) for j55 while ensuring the brake hose remains straight without kinks during installation. Install the brake pipe first into the brake hose by removing its protective cap and tightening it to 15 n.m (11 lb ft). Keep the vehicle still until a proper brake pedal pressure develops because brake system air may result in lost brakes and danger to yourself. Complete the steps by draining hydraulic fluid from the brakes before installing the tire wheel unit back and lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you prevent fluid loss after removing the brake hose for the 2006 Cadillac DTS? Posted by Customer
    A:
    Install a rubber plug into the brake hose bolt hole of the caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2010 Cadillac DTS? Posted by Customer
    A:
    Raise and support the vehicle securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the brake hose and brake pipe fittings before removal for the 2008 Cadillac DTS? Posted by Customer
    A:
    Clean all dirt and foreign material from them, and cap the brake pipe fitting to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the procedure for connecting the brake pipe fitting to the brake hose for the 2007 Cadillac DTS? Posted by Customer
    A:
    Install the brake hose to the bracket, attach the brake hose retainer, and remove the cap from the brake pipe fitting end. Then connect the brake pipe fitting to the brake hose, tightening it to 15 N.m (11 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after installing the brake hose for the 2009 Cadillac DTS? Posted by Customer
    A:
    Install the brake hose to the brake hose bracket and attach the brake hose retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear 19366671 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366671 Flex Hose, Rear is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366671 Flex Hose, Rear fits certain Cadillac DTS models.
The original GM component designated by manufacturer part number 19366671 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear. The component 19366671 is constructed from durable material and its dimensions span 11.4 x 3.1 x 1.1 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366671 has available replacement options 15230029. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.