Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15818106
Flex Hose, Front Passenger Side

2008-2015 Cadillac CTS

Customer Questions & Expert Answers (8)
GM 15818106 Flex Hose, Front Passenger Side
GM 15818106 Flex Hose, Front Passenger Side
GM 15818106 Flex Hose, Front Passenger Side
GM 15818106 Flex Hose, Front Passenger Side
  • Part Description
    Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$25.52 MSRP: $45.57
You Save: $20.05 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • 2010 Cadillac CTS Flex Hose, Front Passenger Side Diagram for 15818106
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15818106

  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2015 Cadillac CTSBase, Luxury, Performance, Premium, V, Vsport, Vsport Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15818106 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15818106 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front brake line on an AWD on Cadillac CTS? Posted by Customer
    A:
    Before working on the brake hose of an AWD vehicle you must lift the vehicle and remove its wheel to access the necessary components. Sever the front brake pipe to avoid brake fluid loss or contamination then install the protecting cap. Unbolt the brake hose retainer clip and bolt then disconnect the wire harness clip that connects to the brake hose retainer. Take out the bolt from the brake hose fitting and gaskets. Put both pieces of gasket into the garbage. Put two brake hose gaskets into the brake hose fitting bolt before mounting and attaching the brake hose assembly to the caliper. Secure the fitting bolt at 49 Nm (36 lb ft). Put the brake hose retainer bolt in place and secure it to 10 Nm (89 lb in) torque setting. Then join the wheel speed sensor wire harness clip to the brake hose retainer and secure the front brake hose retainer clip . Attach the front brake pipe at its connection point and torque it to 18 Nm (13 lb ft). Complete the brake process by removing trapped air then adding the tire to the wheel assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you connect the clutch hydraulic hose to the clutch slave cylinder for the 2010 Cadillac CTS? Posted by Customer
    A:
    Align the clutch hydraulic hose locating tab with the notch in the slave cylinder hose fitting, push the hose into the clutch slave cylinder until a "click" is heard, and tug gently to ensure proper retention.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What needs to be done with the rear brake pipe fitting for the 2009 Cadillac CTS? Posted by Customer
    A:
    Disconnect the rear brake pipe fitting and cap it to prevent brake fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the surge tank for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove the clutch hydraulic hose retaining clip from the clutch master cylinder and install a cap or plug to the exposed hose and fittings to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    How do you remove the brake hose for the 2008 Cadillac CTS? Posted by Customer
    A:
    Remove the brake hose fitting bolt and the brake hose fitting gaskets from the brake hose, discarding the gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after disconnecting the clutch hydraulic hose for the 2008 Cadillac CTS? Posted by Customer
    A:
    Remove the clutch hydraulic hose retainer and take out the clutch hydraulic hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What components need to be removed next for the 2010 Cadillac CTS? Posted by Customer
    A:
    Remove the front brake hose retainer clip, the brake hose retainer bolt, and disconnect the wheel speed sensor wire harness clip from the brake hose retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Passenger Side 15818106 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15818106 Flex Hose, Front Passenger Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15818106 Flex Hose, Front Passenger Side fits certain Cadillac CTS models.
The original GM component designated by manufacturer part number 15818106 maintains top performance when functioning as the Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Passenger Side. The component 15818106 is constructed from durable material and its dimensions span 3.0 x 3.0 x 23.9 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 15818106 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.