Make sure this part fits

GM 15882533
Flex Hose, Front Driver Side

2004-2012 GM

Customer Questions & Expert Answers (15)
GM 15882533 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15101603
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15882533 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15882533 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you detach the brake pipe from the wheel cylinder for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Detach the brake pipe and inspect the area for repair or replacement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done if sectioning the brake pipe for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Use a replacement pipe of the same type and outside diameter, and fittings of the appropriate size and type, creating flares that match the original design.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the brake hose to the brake pipe for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Remove the plug or cap from the exposed brake pipe fitting and ensure the hose is not twisted and does not contact any suspension components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How can fluid loss and contamination be prevented during the process for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done if sectioning the brake pipe for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Use a replacement pipe of the same type and outside diameter, and fittings of the appropriate size and type, creating flares that match the original design.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake line to the brake hose for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Tighten the brake line to the brake hose with the mounting bolt to 17 Nm (13 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe from the brake hose for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Use a backup wrench on the brake pipe fitting to disconnect it, and install a plug or cap in the brake pipe fitting to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done if the retaining clip is flattened or damaged for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Discard and replace it with a new one.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you tighten the brake hose fitting for the 2010 GMC Canyon? Posted by Customer
    A:
    Using a backup wrench, tighten the brake hose fitting to 17 Nm (13 lb ft) and ensure the retaining clip is properly seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What tool is used to cut the brake pipe for the 2006 GMC Canyon? Posted by Customer
    A:
    Use the pipe cutter included in the Brake Pipe Flaring Kit (J 45405) to cut the brake pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done before disconnecting the brake pipe from the brake hose for the 2008 GMC Canyon? Posted by Customer
    A:
    Clean all dirt and foreign material from the brake hoses and brake pipes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the front brake hose retaining clip at the frame for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove the bolt and gaskets from the brake caliper before taking out the brake hose from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after detaching the brake line from the brake hose for the 2007 GMC Canyon? Posted by Customer
    A:
    Remove the brake line to the left wheel cylinder, followed by the brake line to the right wheel cylinder, and install rubber caps or plugs in the brake lines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you prepare the pipe for flaring for the 2007 GMC Canyon? Posted by Customer
    A:
    Chamfer the inside and outside diameter of the pipe with the de-burring tool from the kit, then install the tube nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 15882533 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15882533 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15882533 Flex Hose, Front Driver Side fits certain Chevrolet Colorado models, as well as GMC Canyon models.
The original GM component designated by manufacturer part number 15882533 maintains top performance when functioning as the Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 15882533 is constructed from durable material and its dimensions span 2.1 x 18.7 x 1.0 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 15882533 has available replacement options 15101603. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.