Make sure this part fits

GM 15882536
Flex Hose, Front Driver Side

2004-2012 GM

Customer Questions & Expert Answers (15)
GM 15882536 Flex Hose, Front Driver Side
GM 15882536 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaces
    15106441
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15882536
    Part DescriptionHose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
    Other NamesHose, Hydraulic Brake
    Item Dimensions5.1 x 24.4 x 1.1 inches
    Item Weight0.70 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15106441
    ManufacturerGeneral Motors
    SKU15882536
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
    2004-2012 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15882536 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15882536 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after cutting the brake pipe for the 2005 Chevrolet Colorado? Posted by Customer
    A:
    Select the appropriate size of brake pipe and tube nuts, strip the nylon coating from the end to be flared, and chamfer the pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What type of brake pipe should be used when replacing brake pipes for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Always use double-walled steel brake pipe to prevent brake system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you tighten the brake hose fitting for the 2007 Chevrolet Colorado? Posted by Customer
    A:
    Using a backup wrench on the brake pipe fitting, tighten it to 17 N.m (13 lb ft) and ensure the retaining clip is properly seated before installing the new brake pipe retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Raise the vehicle and inspect the condition of the retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2009 Chevrolet Colorado? Posted by Customer
    A:
    Raise the vehicle and inspect the retaining clip for any damage; if it is flattened or damaged, replace it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after cutting the brake pipe for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Remove the sectioned pipe and select the appropriate size of brake pipe and tube nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake lines for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Fill the master cylinder reservoir if necessary and bleed the brake system before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe from the brake hose for the 2006 Chevrolet Colorado? Posted by Customer
    A:
    Use a backup wrench on the brake pipe fitting to disconnect it, and install a plug or cap in the brake pipe fitting to prevent fluid loss and contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step in the process for the 2007 GMC Canyon? Posted by Customer
    A:
    Raise the vehicle and remove the brake pipe from the junction block using a backup wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the copper gaskets when removing the brake hose for the 2008 GMC Canyon? Posted by Customer
    A:
    Remove the copper gaskets from the brake hose bolt, as these may stick to the brake caliper or the bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured when installing the brake hose to the brake pipe for the 2009 GMC Canyon? Posted by Customer
    A:
    Ensure the hose is not twisted and does not contact any suspension components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation clearance requirement for the 2006 GMC Canyon? Posted by Customer
    A:
    Maintain a clearance of 19 mm (3/4 in) from all moving components during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the procedure for installing the new brake hose for the 2007 GMC Canyon? Posted by Customer
    A:
    Connect the brake line to the brake hose and tighten the mounting bolt to 17 N.m (13 lb ft). Install a new retaining clip for the rear brake hose and position it on the mounting bracket, then install and tighten the mounting bolt to 19 N.m (14 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be inspected when disconnecting the brake pipe fitting from the brake hose at the frame for the 2010 GMC Canyon? Posted by Customer
    A:
    Inspect the retaining clip for damage; if it is flattened or damaged, replace it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15882536, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15882536 Flex Hose, Front Driver Side. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15882536 Flex Hose, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery