Make sure this part fits

GM 22732538
Filler Neck

2005-2009 GM

Customer Questions & Expert Answers (6)
GM 22732538 Filler Neck
GM 22732538 Filler Neck
  • Part Description
    Hose, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
  • Manufacturer
    General Motors
Make sure this part fits
$40.18 MSRP: $62.88
You Save: $22.70 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22732538
    Part DescriptionHose, Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
    Other NamesFiller Pipe; Lower Hose
    Item Dimensions4.2 x 4.1 x 2.1 inches
    Item Weight0.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22732538
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Chevrolet EquinoxLS, LT, LTZ, Sport6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
    2006-2009 Pontiac TorrentBase, GXP6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22732538 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22732538 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel filler hose on Chevrolet Equinox? Posted by Customer
    A:
    The operation to replace the fuel filler tube requires ensuring that the Fuel Tank contains less than 1/4 of its capacity and optionally draining excess fuel if needed. The replacement hose clamps need to be obtained after the new fuel filler tube hoses become available but do not include clamps. Begin the replacement work by disconnecting the negative Battery Cable then making sure to avoid smoking area and open flames. To start the procedure remove the fuel filler cap then support the vehicle at height before you disconnect the right rear wheel and its tire alongside the right rear wheelhouse inner liner. The first step toward installing the new fuel hoses requires loosening the clamp on top of the fuel filler tube and removing the fuel filler tube along with both the fresh air hose and fuel vent tubes directly attached to the Fuel Tank. To replace the fuel filler tube the technician disconnects the fresh air hose from the tube as well as removes the closeout grommet and the fuel filler tube bracket bolts from the vehicle. The first step for installation involves using the fresh air hose to connect to the fuel filler tube followed by closeout grommet installation and correct positioning of the fuel filler tube inside the vehicle with alignment to the closeout grommet. Insert and tighten the two fuel filler tube bracket bolts to 12 n.m (106 lb in). Fix the hose-connecting tube to the Fuel Tank while keeping the hose in contact with the tank body and placing the clamp no further than 13 mm (1/2 in) from the hose end before tightening it to 5 n.m (44 lb in). Finally connect the fuel filler vent tube with the fresh air hose before reinstallation of the inner wheelhouse liner followed by wheel assembly. Lower the vehicle onto the floor and reinstall the fuel filler cap after which run the service bay diagnostic test through the scanner to check the fuel system vapor zones.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the fuel filler tube be secured during installation for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    Secure the fuel filler tube with the two bracket bolts, tightening them to 12 N.m (106 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    How do you remove the fuel filler tube for the 2008 Chevrolet Equinox? Posted by Customer
    A:
    Remove the two fuel filler tube bracket bolts and take out the fuel filler tube from the vehicle, along with the closeout grommet, and separate the fresh air hose from the fuel filler tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the next step after positioning the filler tube-to-fuel tank connecting hose for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Tighten the hose clamp to 5 Nm (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the final step after lowering for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Install the fuel filler cap and perform the Service Bay Diagnostic Test for the EVAP emission system using the scan tool to verify the integrity of the vapor handling areas of the fuel system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22732538, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22732538 Filler Neck. It is sometimes referred to as GM Fuel Filler Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22732538 Filler Neck. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery