Make sure this part fits

GM 15224351
Power Steering Return Hose

2009-2015 Cadillac CTS

Customer Questions & Expert Answers (5)
GM 15224351 Power Steering Return Hose
GM 15224351 Power Steering Return Hose
  • Part Description
    Hose, Steering Gear Oil Return; Power Steering Hose
  • Manufacturer
    General Motors
Make sure this part fits
$41.89 MSRP: $102.20
You Save: $60.31 (60%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2015 Cadillac CTSV, Vsport, Vsport Premium6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15224351 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15224351 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the hydraulic hose for the clutch on Cadillac CTS? Posted by Customer
    A:
    First, the replacement process starts with removing the surge tank bolts until you can move the tank out of the way. Secure the clutch Hydraulic Hose retaining clip on the Clutch Master Cylinder then install a cap or plug to both fittings for protection against fluid loss and contamination. First disconnect the clutch Hydraulic Hose from the Clutch Master Cylinder then raise the vehicle while providing support and unclip the clutch Hydraulic Hose from the Clutch Slave Cylinder. Because check valves exist in the Clutch Slave Cylinder and lower hose end and slave cylinder fitting the hose must remain unsealed when disconnecting it this will only cause small fluid leaks. Unwind the clutch Hydraulic Hose retainer before pulling out the clutch Hydraulic Hose from the vehicle. To install the clutch Hydraulic Hose position it inside the vehicle then secure the clutch Hydraulic Hose retainer while placing the clutch Hydraulic Hose retaining clip onto the Clutch Slave Cylinder. Route the hose upward above the Clutch Slave Cylinder with no kinks or sharp bends or downward loops and make sure it avoids touching sharp or hot surfaces. Run the clutch Hydraulic Hose through the vehicle using the clutch Hydraulic Hose locating tab to match the notch on the slave cylinder hose fitting. Push the hose inside the Clutch Slave Cylinder until it creates a "click" sound then verify the fit by lightly tugging on the hose. Put the vehicle in a lowered position and secure the clutch Hydraulic Hose retaining clip to the master cylinder before attaching the hose to the master cylinder by pushing it until you hear a "click." test retention by gently tugging on the hose. Bleed the clutch hydraulic system before securing the Clutch Master Cylinder's coolant surge tank at its designated spot with surge tank bolts.
    Posted by ChevyPartsGiant Specialist
    Q:
    What components need to be removed after the fuel injector sight shield for the 2010 Cadillac CTS? Posted by Customer
    A:
    Remove the power steering pump pulley, followed by the front air deflector and the front compartment lower noise shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be reinstalled after cleaning for the 2009 Cadillac CTS? Posted by Customer
    A:
    Reinstall the front compartment lower noise shield and the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you confirm the retention of the clutch hydraulic hose at the master cylinder for the 2009 Cadillac CTS? Posted by Customer
    A:
    Push it in until a "click" is heard, followed by a gentle tug to confirm retention.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 15224351 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15224351 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15224351 Power Steering Return Hose fits certain Cadillac CTS models.
The original GM component designated by manufacturer part number 15224351 maintains top performance when functioning as the Hose, Steering Gear Oil Return; Power Steering Hose unit. The component 15224351 is constructed from durable material and its dimensions span 4.4 x 2.2 x 1.6 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Reservoir Hose. The part 15224351 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.