Make sure this part fits

GM 15251170
Power Steering Return Hose

2004-2011 GM

Customer Questions & Expert Answers (15)
GM 15251170 Power Steering Return Hose
GM 15251170 Power Steering Return Hose
  • Part Description
    Hose, Steering Gear Oil Return; Power Steering Hose
  • Replaces
    25758249
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15251170 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15251170 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose Outlet on Cadillac SRX? Posted by Customer
    A:
    Replacement of the power steering gear outlet pipe/hose commences with raising and supporting the vehicle and removing the front air deflector. Position a drain pan under the car before proceeding to unscrew and remove the power steering gear outlet hose retaining bolt and detach the power steering outlet hose from the Power Steering Cooler unit. The next step includes power steering line removal from power steering gear bolt retention before disconnecting the power steering outlet hose from the power steering gear unit. The return power steering line must also be detached from the car body. The first step of installation includes plumbing the power steering gear outlet hose towards the power steering gear but keeping it attached to the vehicle. Fasten the power steering hoses onto the power steering gear retaining bolt while securing it at 23 nm (17 ft. Lbs.). After connecting the power steering gear outlet hose to the Power Steering Cooler you should install the power steering gear outlet hose to frame retaining bolt and tighten it to 4 nm (40 inch lbs.). Safely dispose of the drain pan before putting back the front air deflector while lowering the vehicle then starting the power steering system bleeding process.
    Posted by ChevyPartsGiant Specialist
    Q:
    What are the final steps to complete the installation for the 2006 Cadillac SRX? Posted by Customer
    A:
    Reassemble the air cleaner assembly front half, tightening the screws to 8 Nm (71 inch lbs.), followed by reinstalling the air cleaner intake duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the hoses for the 2008 Cadillac SRX? Posted by Customer
    A:
    Clean any excess fluid and remove the drain pans.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the retaining bolt for the 2009 Cadillac STS? Posted by Customer
    A:
    Disconnect the power steering cooler hoses from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you secure the power steering gear inlet hose to the power steering gear for the 2005 Cadillac STS? Posted by Customer
    A:
    Secure the power steering gear inlet hose to the power steering gear with a bolt tightened to 23 Nm (17 inch lbs.), ensuring to follow the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the drain pan from under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the retaining bolt be installed for the 2005 Cadillac SRX? Posted by Customer
    A:
    Install the retaining bolt to the frame and tighten it to 4 Nm (35 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after placing the drain pan for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the power steering gear outlet hose to frame retaining bolt and disconnect the power steering gear outlet hose from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Gear Inlet Pipe/Hose for the 2009 Cadillac SRX? Posted by Customer
    A:
    Begin by removing the air cleaner assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after placing the drain pan for the 2007 Cadillac STS? Posted by Customer
    A:
    Remove the power steering gear outlet hose to frame retaining bolt and disconnect the power steering gear outlet hose from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2008 Cadillac STS? Posted by Customer
    A:
    Attach the new power steering hose to the vehicle and connect it to the power steering gear, ensuring the retaining bolt is tightened to 23 N.m (17 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you disconnect the power steering gear inlet hose for the 2007 Cadillac SRX? Posted by Customer
    A:
    Disconnect the power steering gear inlet hose fitting from the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after tightening the bolts for the 2006 Cadillac STS? Posted by Customer
    A:
    Connect the power steering cooler pipe/hose to the power steering lines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the power steering cooler hose to frame retaining bolt be installed for the 2010 Cadillac STS? Posted by Customer
    A:
    Install the bolt and tighten it to 10 Nm (88 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 15251170 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15251170 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15251170 Power Steering Return Hose fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 15251170 maintains top performance when functioning as the Hose, Steering Gear Oil Return; Power Steering Hose unit. The component 15251170 is constructed from durable material and its dimensions span 8.3 x 6.1 x 2.3 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Reservoir Hose. The part 15251170 has available replacement options 25758249. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.