Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15295841
Power Steering Pressure Hose

2001-2010 GM

Customer Questions & Expert Answers (4)
GM 15295841 Power Steering Pressure Hose
GM 15295841 Power Steering Pressure Hose
GM 15295841 Power Steering Pressure Hose
  • Part Description
    Hose Assembly-Power Steering Gear Inlet; Power Steering Hose
  • Replaces
    15062625
  • Manufacturer
    General Motors
Make sure this part fits
$79.21 MSRP: $136.03
You Save: $56.82 (42%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 15295841 Power Steering Pressure Hose is Ref No. 8 in the diagram below

    2007 GMC Sierra 2500 HD Power Steering Pressure Hose Diagram for 15295841
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15295841

  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007-2010 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.6 L DIESEL
    2001-2010 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    2001-2006 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007-2010 GMC Sierra 3500 HDSLE, SLT, WT8 Cyl 6.6 L DIESEL
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15295841 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15295841 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose on a parallel hybrid truck on Chevrolet Silverado 3500? Posted by Customer
    A:
    To replace the Power Steering Cooler pipe/hose on parallel hybrid truck, first disconnect the energy storage box and put a drain pan under the vehicle. Drain the fluid from the reservoir to avoid unnecessary spillage. Delete the clamp holding the Power Steering Cooler inlet hose to the power steering gear, as well as the clamp holding the Power Steering Cooler outlet hose to the Power Steering Pump. Then, remove the bolts that fixing the Power Steering Cooler to the radiator support, and remove the cooler from the vehicle. For installation, install the Power Steering Cooler back on the radiator support and bolt down using 5 nm (44 inch lbs). Next, attach the Power Steering Cooler outlet hose to the Power Steering Pump and install the retaining clamp. Connect the power steering inlet hose at power steering gear and fasten using retention clamp. Reserve and bleed the power steering system, check all hose connectors to find any leaks, install the front grille back, and finally restore the energy storage box after servicing.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Steering Hose in a rack and pinion system on GMC Sierra 3500? Posted by Customer
    A:
    The first step to replace the Power Steering Cooler pipe/hose in a Rack And Pinion system involves removing the front grille. Begin by separating the power steering outlet hose from the power steering gear while always paying attention to the Power Steering Hose disconnected notice for safety purposes. Disconnect the power steering inlet hose from the Power Steering Pump before extracting the bolts which secure the cooler to the radiator support so you can smoothly remove the Power Steering Cooler. To install the Power Steering Cooler first position it back into its original place then tighten the retaining bolts to 5 nm (44 inch lbs.) according to the fastener notice specifications. The power steering inlet hose requires connection to the Power Steering Pump while securing it with a retaining clamp. Install the power steering outlet hose to the power steering gear by attaching it with its retaining clamp. After power steering system bleeding you must check every hose connection for leaks before reinstalling the front grille.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the power steering inlet hose for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the power steering inlet hose to the power steering gear and then to the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Pressure Hose 15295841 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15295841 Power Steering Pressure Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15295841 Power Steering Pressure Hose fits certain Chevrolet Silverado 2500 HD, Silverado 3500, Silverado 2500 HD Classic models, as well as GMC Sierra 2500 HD, Sierra 3500, Sierra 2500 HD Classic models.
The original GM component designated by manufacturer part number 15295841 maintains top performance when functioning as the Hose Assembly-Power Steering Gear Inlet; Power Steering Hose unit. The component 15295841 is constructed from durable material and its dimensions span 7.9 x 3.9 x 19.2 inches while weighing 1.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Hose; Hose, Hydraulic Steering Gear Pressure. The part 15295841 has available replacement options 15062625. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.