Make sure this part fits

GM 10376949
Power Steering Return Hose

2004-2010 GM

Customer Questions & Expert Answers (14)
GM 10376949 Power Steering Return Hose
  • Part Description
    Hose-Power Steering Fluid Cooler Outlet; Power Steering Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2008 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10376949 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10376949 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you connect the inlet hose fitting to the power steering pump for the 2007 Cadillac SRX? Posted by Customer
    A:
    Connect the inlet hose fitting to the power steering pump, tightening it to 38 N.m (28 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Reservoir Inlet Pipe/Hose (LY7) for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed next after disconnecting the pipe/hose for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the power steering cooler pipe/hose to frame retaining bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you connect the power steering gear inlet hose for the 2006 Cadillac SRX? Posted by Customer
    A:
    Connect the power steering gear inlet hose to the power steering gear, ensuring to tighten the retaining bolt to 23 Nm (17 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What additional component needs to be removed for the 2004 Cadillac SRX? Posted by Customer
    A:
    The power steering return line.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be placed under before removing the power steering gear outlet hose for the 2005 Cadillac STS? Posted by Customer
    A:
    A drain pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What additional line needs to be removed for the 2007 Cadillac STS? Posted by Customer
    A:
    The power steering return line.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the inlet hose to the steering gear for the 2008 Cadillac SRX? Posted by Customer
    A:
    Install the bracket bolt and tighten it to 23 N.m (17 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What steps are involved in removing the power steering gear inlet hose for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the power steering gear inlet hose from the frame mounting bolts and the retaining bolt to the power steering gear, followed by taking the hose out from the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the retaining bolt for the 2009 Cadillac STS? Posted by Customer
    A:
    Disconnect the power steering cooler hoses from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Gear Inlet Pipe/Hose for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the front air deflector and place a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after raising for the 2006 Cadillac STS? Posted by Customer
    A:
    Remove the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the old power steering cooler hoses for the 2010 Cadillac STS? Posted by Customer
    A:
    Position the new power steering cooler hoses in place and install them to the power steering cooler using the hose clamps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 10376949 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10376949 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10376949 Power Steering Return Hose fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 10376949 maintains top performance when functioning as the Hose-Power Steering Fluid Cooler Outlet; Power Steering Hose unit. The component 10376949 is constructed from durable material and its dimensions span 7.9 x 6.9 x 27.6 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Upper Return Hose; Hose, Steering Fluid Cooler. The part 10376949 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.