Make sure this part fits

GM 10376952
Power Steering Return Hose

2004-2010 GM

Customer Questions & Expert Answers (15)
GM 10376952 Power Steering Return Hose
GM 10376952 Power Steering Return Hose
  • Part Description
    Hose, Steering Fluid Cooler; Power Steering Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase8 Cyl 4.6 L GAS
    2005-2010 Cadillac STSBase, Platinum8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10376952 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10376952 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new power steering cooler pipe/hose for the 2006 Cadillac STS? Posted by Customer
    A:
    Position the power steering cooler pipe/hose in the vehicle and connect it to the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Reservoir Inlet Pipe/Hose (LY7) for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for securing the inlet hose to the frame mounting bolts for the 2006 Cadillac SRX? Posted by Customer
    A:
    Secure the inlet hose to the frame mounting bolts with a torque of 4 Nm (35 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be removed next for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the left front tire/wheel assembly and the left front bumper fascia extension.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after reinstalling the hoses and tightening the bolts for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the drain pan, reinstall the front air deflector, lower the vehicle, and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What bolts need to be removed after disconnecting the inlet hose for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the retaining bolts for the power steering gear inlet and outlet hoses, followed by the bracket bolt for the inlet hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done with the power steering gear outlet hose to frame retaining bolt for the 2007 Cadillac STS? Posted by Customer
    A:
    Install it and tighten it to 4 N.m (40 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after disconnecting the power steering gear outlet hose from the cooler for the 2005 Cadillac STS? Posted by Customer
    A:
    Remove the power steering lines to power steering gear retaining bolt and disconnect the power steering gear outlet hose from the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for the power steering cooler hose to frame retaining bolt for the 2009 Cadillac STS? Posted by Customer
    A:
    Tighten it to 10 Nm (88 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed after raising for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the front air deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What components need to be reinstalled after the replacement for the 2009 Cadillac SRX? Posted by Customer
    A:
    Reinstall the left side front bumper fascia extension, the front air deflector, and the air cleaner assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Gear Inlet Pipe/Hose (LH2) for the 2005 Cadillac STS? Posted by Customer
    A:
    Begin by removing the front air deflector and placing a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2008 Cadillac STS? Posted by Customer
    A:
    Attach the new power steering hose to the vehicle and connect it to the power steering gear, ensuring the retaining bolt is tightened to 23 N.m (17 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after disconnecting the hoses for the 2010 Cadillac STS? Posted by Customer
    A:
    Remove the power steering cooler hose to frame retaining bolt and disconnect the power steering cooler hoses from the power steering cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 10376952 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10376952 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10376952 Power Steering Return Hose fits certain Cadillac SRX, STS models.
The original GM component designated by manufacturer part number 10376952 maintains top performance when functioning as the Hose, Steering Fluid Cooler; Power Steering Hose unit. The component 10376952 is constructed from durable material and its dimensions span 28.5 x 8.0 x 7.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Upper Return Hose. The part 10376952 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.