Make sure this part fits

GM 94856336
Flex Hose

1998-2002 Chevrolet Prizm

Customer Questions & Expert Answers (7)
GM 94856336 Flex Hose
  • Part Description
    Hose, Rear Brake
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number94856336
    Part DescriptionHose, Rear Brake
    Other NamesBrake Hose; Hose, Hydraulic Brake
    Item Dimensions13.5 x 1.6 x 1.1 inches
    Item Weight0.50 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU94856336
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet PrizmBase, LSi4 Cyl 1.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94856336 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94856336 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake line using the J29803-A ISO Flaring Kit on Chevrolet Prizm? Posted by Customer
    A:
    Use the J29803-A tool to install new double-walled steel brake pipe that will stop brake system failures. You need both steel and tube materials before starting. Cut 3 mm (1/8") more length than your string measurement of the old pipe. Apply fittings to the tubing first then proceed with flaring. Prepare the pipe ends using a de-burring device before removing all lubricants from the brake pipe and flaring tool. Fix the tool body in a vise and place a suitable size collet and forming mandrel for the specific pipe measurements. Then, insert the proper forming mandrel into the tool body. Keep the mandrel in place while threading the forcing screw before letting it touch the mandrel then turning it one full revolution. Position the clamping nut over the brake pipe until the correct collet fits in place. Keep 19 mm (3/4 inches) of the tube visible at the end. Safe the tool body while fitting the brake pipe end close to the forming mandrel face then clamp the threaded nut tightly. Twist the forcing screw until it meets the mandrel stop and resist turning any further. Pull out the clamping nut from the tool body and detach the clamping nut and collet components to make the flare usable. Complete the installation by bending the pipe according to the original shape with a 19 mm (3/4 inch) safe space from all moving parts during the process.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the fluid cooler pipes for the 2000 Chevrolet Prizm? Posted by Customer
    A:
    Tighten the inlet and outlet fluid cooler pipe flare nuts to 27 Nm (20 ft. lbs.) and the bracket bolts to 5 Nm (44 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What are the final steps after bleeding the brake system for the 2001 Chevrolet Prizm? Posted by Customer
    A:
    Reinstall the front tire and wheel assembly, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What needs to be removed from the brake caliper for the 2002 Chevrolet Prizm? Posted by Customer
    A:
    The brake hose bolt, the 2 seal washers, and the brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the hydraulic clutch hose/pipe for the 2002 Chevrolet Prizm? Posted by Customer
    A:
    Begin by removing the reservoir cap and cleaning the pipes of any dust and dirt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Hydraulic Hose
    Q:
    What is the next step after installing the front brake hose for the 2000 Chevrolet Prizm? Posted by Customer
    A:
    Connect the front brake hose to the front brake pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 94856336, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 94856336 Flex Hose. It is sometimes referred to as GM Brake Line, GM Hydraulic Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 94856336 Flex Hose. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery