Make sure this part fits

GM 10430449
Fender Liner, Front Inner Driver Side

1997-2005 GM

Customer Questions & Expert Answers (4)
GM 10430449 Fender Liner, Front Inner Driver Side
  • Part Description
    Liner, Front Fender Inner Wheel House; Fender Splash Shield
  • Position
    Front Inner Driver Side
  • Replaces
    10408454, 10298266, 10289513
  • Manufacturer
    General Motors
Make sure this part fits
$6.37 MSRP: $9.49
You Save: $3.12 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10430449
    Part DescriptionLiner, Front Fender Inner Wheel House; Fender Splash Shield
    Other NamesSplash Shield
    Item Dimensions30.1 x 28.0 x 14.1 inches
    Item Weight2.30 Pounds
    PositionFront Inner Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10408454, 10298266, 10289513
    ManufacturerGeneral Motors
    SKU10430449
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10430449 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10430449 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Fender Splash Shield on Buick Century? Posted by Customer
    A:
    Proceed to replace the front fender splash shield by first removing bolts from the front bumper fascia and then the nut from the back of the front fender splash shield stud followed by the bolt at the lower engine compartment side rail front tab and finally all bolts from the rear fender. After this disconnect the front fender splash shield from its fender position. After placing the front fender splash shield into position above the stud at the wheelhouse opening you should install the nut to the stud at the rear of the front fender splash shield before tightening it to 4 N.m (35 lb in). Begin by fitting and tightening bolts at the front bumper fascia front fender splash shield section with torque values at 2 N.m (18 lb in). Then proceed with installing and tightening the bolts located at the rear fender section with 7 N.m (61 lb in) torque. Tighten the bolt from the front tab of the front fender splash shield to the lower engine compartment side rail until it reaches 4.5 N.m (40 lb in).
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after tightening the front bumper fascia bolts for the 2005 Buick Century? Posted by Customer
    A:
    Install the bolts at the rear of the fender, tightening these to 7 Nm (61 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    Q:
    What is the first step for installation of the front fender liner for the 2000 Buick Regal? Posted by Customer
    A:
    Position the front fender liner to the wheelhouse opening over the stud.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fender Splash Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10430449, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10430449 Fender Liner, Front Inner Driver Side. It is sometimes referred to as GM Fender Splash Shield. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10430449 Fender Liner, Front Inner Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery