How to service and repair the Fender Splash Shield on Chevrolet Colorado?

The first step to install the wheelhouse splash shield requires vehicle lift and support before proceeding. Start by removing both the wheel along with the tire assembly. Start by removing push-pins from the inner wheelhouse splash shield before carefully pulling off the splash shield from the vehicle. First remove the push-pins from the outer wheelhouse splash shield before you can detach the outer wheelhouse splash shield from the vehicle. First install the outer wheelhouse splash shield on the vehicle before inserting the rearward push-pin then adding the remainder of the push-pins. Fasten the inner wheelhouse splash shield to the vehicle through use of the push-pins. Complete the process by replacing the tire along with its wheel assembly after you lower the vehicle.

How to replace the front Fender Splash Shield on Chevrolet Malibu?

Beginning to replace the wheelhouse fender splash shield demands support for the vehicle during a raising process. Now detach the tire along with the wheel from the vehicle. The installation procedure begins by removing two retainers and three bolts that fasten the front wheelhouse panel fender splash shield before you can take off the shield itself. Adhere the fender splash shield in its proper position while tightening the three bolts before reattaching the two retainers. Put the tire and wheel back before bringing down the vehicle.

How to replace the rear Fender Splash Shield on Chevrolet Impala?

A mechanic should work on lifting and supporting the vehicle before starting the replacement of the rear fender splash shield. Start by removing the rear tires and wheels before extracting the rocker panel to rear fender splash shield screw together with the quarter panel to rear fender splash shield screws and the lower quarter panel to rear fender splash shield screw. You need the J 38778 Door Trim Pad Clip Remover (J 38778) to detach the lower quarter panel to rear fender splash shield push-in retainer. The next step is to remove rear fender splash shield to rear fender palnuts before taking the rear fender splash shield out of the vehicle. Mount the rear fender splash shield onto the rear fender while the palnuts should be tightened to 2 N.m (18 lb in). Begin with installing the lower quarter panel to rear fender splash shield push-in retainer before securing the lower quarter panel to rear fender splash shield screw at 2 N.m (18 lb in). Single out the screws and attach the quarter panel to rear fender splash shield screws before securing them to 2 N.m (18 lb in). The last step includes attaching the rocker panel to rear fender splash shield screw and tightening it to also reach 2 N.m (18 lb in). Place the rear tires together with their wheels before lowering the car down.

OEM Chevrolet Fender Splash Shield

Wheelhouse Liner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

536 Fender Splash Shields found

View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 23327373
$200.47 MSRP: $299.71
You Save: $99.24 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
- Replaces: 23259923, 23163356
Fits the following Chevrolet Models:
- Corvette | 2015-2019 | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 23327376
$169.12 MSRP: $252.85
You Save: $83.73 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
- Replaces: 23163355, 23259926, 23457080
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 84062808
$120.22 MSRP: $179.74
You Save: $59.52 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
- Replaces: 23420895
Fits the following Chevrolet Models:
- Malibu | 2016-2018 | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Under Cover, Front Passenger Side
Part Number: 23413528
$23.00 MSRP: $34.24
You Save: $11.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield Assembly-Front Compartment Splash; Side Cover; Shield, Front Fender Inner Wheel House
- Position: Front Passenger Side
- Replaces: 22980665
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Rear Fender Liner, Front Inner Passenger Side
Part Number: 15806318
$67.73 MSRP: $100.80
You Save: $33.07 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427, Base, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Lower Shield, Front Inner
Part Number: 15826162
$26.34 MSRP: $41.22
You Save: $14.88 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Front Fender Inner Wheel House
- Position: Front Inner
Fits the following Chevrolet Models:
- Malibu | 2008-2012 | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 84062807
$104.94 MSRP: $156.20
You Save: $51.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
- Replaces: 23420894
Fits the following Chevrolet Models:
- Malibu | 2016-2018 | Hybrid, L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Rear Fender Liner, Front Inner Driver Side
Part Number: 15806317
$52.72 MSRP: $75.43
You Save: $22.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427, Base, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Rear Fender Liner, Front Inner Passenger Side
Part Number: 15827791
$70.19 MSRP: $104.47
You Save: $34.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2006-2009 | 427 Limited Edition Z06, Z06, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 84506565
$86.33 MSRP: $128.49
You Save: $42.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
Fits the following Chevrolet Models:
- Malibu | 2019-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Liner Extension, Front Inner Passenger Side
Part Number: 15252927
$81.01 MSRP: $120.57
You Save: $39.56 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension, Front Fender Inner Wheel House
- Position: Front Inner Passenger Side
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Front Fender Liner, Driver Side
Part Number: 15233301
$72.52 MSRP: $107.94
You Save: $35.42 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner-Front Wheelhouse Front; Fender Splash Shield; Liner, Front Fender Inner Wheel House
- Position: Front Driver Side
Fits the following Chevrolet Models:
- Corvette | 2005-2013 | 427, Base, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 84506561
$124.79 MSRP: $186.57
You Save: $61.78 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
Fits the following Chevrolet Models:
- Malibu | 2019-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 84506559
$124.79 MSRP: $186.57
You Save: $61.78 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
Fits the following Chevrolet Models:
- Malibu | 2019-2024 | Hybrid, L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 86821789
$134.42 MSRP: $200.97
You Save: $66.55 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House
- Position: Front Inner Passenger Side
- Replaced by: 85007041
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 86821784
$128.87 MSRP: $192.67
You Save: $63.80 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House
- Position: Front Inner Driver Side
- Replaced by: 85007034
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Driver Side
Part Number: 84922609
$88.46 MSRP: $131.66
You Save: $43.20 (33%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House
- Position: Front Inner Driver Side
- Replaces: 84320386, 84135942, 84204436
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 22863722
$57.95 MSRP: $82.92
You Save: $24.97 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
- Replaces: 92235897, 92239782
Fits the following Chevrolet Models:
- Camaro | 2010-2013 | LS, LT | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Fender Liner, Front Inner Passenger Side
Part Number: 84922608
$92.25 MSRP: $137.31
You Save: $45.06 (33%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Passenger Side
- Replaces: 84135943, 84320385, 84204434
Fits the following Chevrolet Models:
- Camaro | 2017-2024 | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Fender Liner, Front Passenger Side
Part Number: 20952838
$78.03 MSRP: $116.14
You Save: $38.11 (33%)
Product Specifications
- Other Name: Liner-Front Wheelhouse; Fender Splash Shield; Liner, Front Fender Inner Wheel House
- Position: Front Passenger Side
Fits the following Chevrolet Models:
- Camaro | 2012-2015 | ZL1 | 8 Cyl 6.2 L GAS

| Page 1 of 27 |Next >

1-20 of 536 Results

Chevrolet Fender Splash Shield Parts Questions & Experts Answers

Wheelhouse Liner, Passenger Side
25894546
Q: How to service and repair the Fender Splash Shield on Chevrolet Colorado?
A: The first step to install the wheelhouse splash shield requires vehicle lift and support before proceeding. Start by removing both the wheel along with the tire assembly. Start by removing push-pins from the inner wheelhouse splash shield before carefully pulling off the splash shield from the vehicle. First remove the push-pins from the outer wheelhouse splash shield before you can detach the outer wheelhouse splash shield from the vehicle. First install the outer wheelhouse splash shield on the vehicle before inserting the rearward push-pin then adding the remainder of the push-pins. Fasten the inner wheelhouse splash shield to the vehicle through use of the push-pins. Complete the process by replacing the tire along with its wheel assembly after you lower the vehicle.
Fender Liner, Front Inner Driver Side
22603519
Q: How to replace the front Fender Splash Shield on Chevrolet Malibu?
A: Beginning to replace the wheelhouse fender splash shield demands support for the vehicle during a raising process. Now detach the tire along with the wheel from the vehicle. The installation procedure begins by removing two retainers and three bolts that fasten the front wheelhouse panel fender splash shield before you can take off the shield itself. Adhere the fender splash shield in its proper position while tightening the three bolts before reattaching the two retainers. Put the tire and wheel back before bringing down the vehicle.
Splash Shield, Passenger Side
10349808
Q: How to replace the rear Fender Splash Shield on Chevrolet Impala?
A: A mechanic should work on lifting and supporting the vehicle before starting the replacement of the rear fender splash shield. Start by removing the rear tires and wheels before extracting the rocker panel to rear fender splash shield screw together with the quarter panel to rear fender splash shield screws and the lower quarter panel to rear fender splash shield screw. You need the J 38778 Door Trim Pad Clip Remover (J 38778) to detach the lower quarter panel to rear fender splash shield push-in retainer. The next step is to remove rear fender splash shield to rear fender palnuts before taking the rear fender splash shield out of the vehicle. Mount the rear fender splash shield onto the rear fender while the palnuts should be tightened to 2 N.m (18 lb in). Begin with installing the lower quarter panel to rear fender splash shield push-in retainer before securing the lower quarter panel to rear fender splash shield screw at 2 N.m (18 lb in). Single out the screws and attach the quarter panel to rear fender splash shield screws before securing them to 2 N.m (18 lb in). The last step includes attaching the rocker panel to rear fender splash shield screw and tightening it to also reach 2 N.m (18 lb in). Place the rear tires together with their wheels before lowering the car down.