How to service and repair the rear Fender Splash Shield on Chevrolet Corvette?

Start the repair process by taking off the tire and wheel from the rear before proceeding to remove the bolts for the panel of the rear wheelhouse splash shield and removing the panel itself. The installation of new wheelhouse splash shield panel requires starting with the upper outer bolt followed by the upper center bolts. Crucially position the lower front corner of the wheelhouse splash shield panel behind the door opening finish panel before putting on the attaching bolt. Customers must follow all instructions contained in the Fastener Notice section within the Service Precautions. Mount the leftover hardware pieces to join the wheelhouse splash shield panel with the wheelhouse framework while making sure to tighten the wheelhouse splash shield bolts at the back end to 2 N.m torque (18 lb in). Reinstall the tire together with the wheel after completion of all steps.

How to replace the rear Fender Splash Shield on Chevrolet Corvette?

The process for replacing the rear wheelhouse panel starts with tire and wheel removal followed by bolt uninstallation of the rear wheelhouse splash shield panel before wheelhouse splash shield panel extraction. Before locking in place the new wheelhouse splash shield panel you must first put on the upper outer bolt and then the upper center bolts. The lower front corner of the wheelhouse splash shield panel needs to sit behind the door opening finish panel before installing the attaching bolt. It remains essential to strictly follow the instructions listed in the Service Precautions Fastener Notice. The last step requires installing the remaining bolts to lock down the wheelhouse splash shield panel on the wheelhouse while tightening the rear wheelhouse splash shield bolts to 1.9 N.m (17 lb in). After completing the process the rim and wheel should be replaced in its original position.

OEM Chevrolet Corvette Fender Splash Shield

Wheelhouse Liner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

37 Fender Splash Shields found

View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Driver Side Part Number: 23327813
$167.91 MSRP: $251.03
You Save: $83.12 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Driver Side
- Replaces: 22887231
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Liner Extension, Front Inner Driver Side Part Number: 15252926
$82.63 MSRP: $122.99
You Save: $40.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension, Front Fender Inner Wheel House
- Position: Front Inner Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fender Liner, Front Inner Driver Side Part Number: 23327375
$166.12 MSRP: $248.37
You Save: $82.25 (34%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
- Replaces: 23163354, 23259925, 23457079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Driver Side Part Number: 15874591
$120.96 MSRP: $180.84
You Save: $59.88 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Driver Side
- Replaces: 15270644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fender Liner, Front Inner Driver Side Part Number: 84388705
$150.32 MSRP: $224.74
You Save: $74.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House; Fender Splash Shield
- Position: Front Inner Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Driver Side Part Number: 85521678
$85.15 MSRP: $126.74
You Save: $41.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner Assembly-Rear Wheelhouse *Generic Blacc; Liner, Rear Wheelhouse
- Position: Driver Side
- Replaced by: 85013962
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Splash Shield, Passenger Side Part Number: 84100498
$4.93 MSRP: $7.33
You Save: $2.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Brake Rotor Cooling Duct Opening; Fender Splash Shield; Shield, Front Fender Inner Wheel House
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Driver Side Part Number: 10424682
$23.87 MSRP: $32.74
You Save: $8.87 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Corvette | 50th Anniversary Edition, Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Passenger Side Part Number: 85521679
$85.15 MSRP: $126.74
You Save: $41.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner Assembly-Rear Wheelhouse *Generic Blacc; Liner, Rear Wheelhouse
- Position: Passenger Side
- Replaced by: 85013969
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Fender Liner, Front Inner Driver Side Part Number: 86821790
$94.63 MSRP: $140.84
You Save: $46.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House
- Position: Front Inner Driver Side
- Replaced by: 85675986
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Splash Shield, Driver Side Part Number: 84100499
$4.93 MSRP: $7.33
You Save: $2.40 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover-Front Brake Rotor Cooling Duct Opening; Fender Splash Shield; Shield, Front Fender Inner Wheel House
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Fender Liner, Front Inner Passenger Side Part Number: 86821795
$94.76 MSRP: $141.04
You Save: $46.28 (33%)
ADD TO CART
Product Specifications
- Other Name: Liner, Front Fender Inner Wheel House
- Position: Front Inner Passenger Side
- Replaced by: 85675993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Front Fender Liner, Driver Side Part Number: 15834373
Product Specifications
- Other Name: Liner-Front Wheelhouse Front; Fender Splash Shield; Liner, Front Fender Inner Wheel House
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 427 Limited Edition Z06, Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Wheelhouse, Driver Side Part Number: 14104591
Product Specifications
- Other Name: Liner Rear Wheelhouse Panel; Liner, Rear Wheelhouse
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Driver Side Part Number: 10253795
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Passenger Side Part Number: 10411578
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse, Passenger Side Part Number: 10135988
Product Specifications
- Other Name: Liner; Liner, Rear Wheelhouse; Panel, Rear Wheelhouse
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse, Driver Side Part Number: 10135987
Product Specifications
- Other Name: Liner; Liner, Rear Wheelhouse; Panel, Rear Wheelhouse
- Position: Driver Side
- Replaces: 14100239
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Passenger Side Part Number: 15874590
$117.78 MSRP: $176.09
You Save: $58.31 (34%)
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Passenger Side
- Replaces: 15270643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Wheelhouse Liner, Rear Passenger Side Part Number: 10424681
Product Specifications
- Other Name: Liner, Rear Wheelhouse; Fender Splash Shield
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Corvette | 50th Anniversary Edition, Base | 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 37 Results

Chevrolet Corvette Fender Splash Shield

Want to cut long-term maintenance and repair costs? Choose OEM Fender Splash Shield. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Fender Splash Shield includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Corvette Fender Splash Shield Parts and Q&A

Wheelhouse Liner, Rear Passenger Side
10424681
Q: How to service and repair the rear Fender Splash Shield on Chevrolet Corvette?
A:
Start the repair process by taking off the tire and wheel from the rear before proceeding to remove the bolts for the panel of the rear wheelhouse splash shield and removing the panel itself. The installation of new wheelhouse splash shield panel requires starting with the upper outer bolt followed by the upper center bolts. Crucially position the lower front corner of the wheelhouse splash shield panel behind the door opening finish panel before putting on the attaching bolt. Customers must follow all instructions contained in the Fastener Notice section within the Service Precautions. Mount the leftover hardware pieces to join the wheelhouse splash shield panel with the wheelhouse framework while making sure to tighten the wheelhouse splash shield bolts at the back end to 2 N.m torque (18 lb in). Reinstall the tire together with the wheel after completion of all steps.
Wheelhouse Liner, Rear Driver Side
10424682
Q: How to replace the rear Fender Splash Shield on Chevrolet Corvette?
A:
The process for replacing the rear wheelhouse panel starts with tire and wheel removal followed by bolt uninstallation of the rear wheelhouse splash shield panel before wheelhouse splash shield panel extraction. Before locking in place the new wheelhouse splash shield panel you must first put on the upper outer bolt and then the upper center bolts. The lower front corner of the wheelhouse splash shield panel needs to sit behind the door opening finish panel before installing the attaching bolt. It remains essential to strictly follow the instructions listed in the Service Precautions Fastener Notice. The last step requires installing the remaining bolts to lock down the wheelhouse splash shield panel on the wheelhouse while tightening the rear wheelhouse splash shield bolts to 1.9 N.m (17 lb in). After completing the process the rim and wheel should be replaced in its original position.