Q: How to replace the rear compartment liftgate hinge on Chevrolet Camaro?
A: First you need to remove the rear compartment lift window panel before taking off the nuts and hinges together with their gaskets. Reinstall the hinges and gaskets at their original places while keeping the Fastener Notice in Service Precautions in mind. Return the rear compartment lift panel after putting and securing the nuts at 42 N.m (31 lb ft).
Q: How to Service and Repair a Liftgate Hinge on Chevrolet Equinox?
A: To replace the liftgate hinge, remove liftgate and headliner first. Use a grease pencil to pinpoint the liftgate hinge position on the body and then remove the hinge retaining nuts off the vehicle roof and take the hinge out. For installation align the hinge with the marks made on the vehicle body, remember to install the hinge retaining nuts followed by tightening them to 25 Nm (18 lb ft). Then reinstall the above the windshield (headliner) and lastly the liftgate.
Q: How to replace the liftgate hinge on Chevrolet Malibu?
A: You must first uninstall the liftgate and then remove the headliner to switch out the liftgate hinge. Use a grease pencil to draw the hinge position on the vehicle body and disconnect the hinge retaining nuts from the roof to take out the hinge. Position the hinge on the body marks and place its retaining nuts before you tighten the liftgate studs to 25 N.m (18 lb ft). Reattach the headliner before you put the liftgate back in place.