Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
Equinox | 2007-2017 | L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Suburban 1500 | 2007-2014 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Suburban 2500 | 2007-2013 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Tahoe | 2007-2014 | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Traverse | 2009-2017 | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 15817924, 25795316
Fits the following Chevrolet Models:
Impala | 2006-2013 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Q: How to Service and Repair the Trunk Latch on a Chevrolet Impala?
A: Before starting to replace the rear compartment lid latch mark its position with a grease pencil while the lid is open. Unplug the wires from the latch before removing its holding nuts to extract the latch from the rear storage area. Position the new latch at the pencil marks then install its nuts while tightening them to 80 lb in (9 Nm). Put back the electrical connectors to the latch before closing the rear compartment.
Q: How to replace the rear trunk latch on Chevrolet Malibu?
A: Mark the position of the latch on the lid by opening the rear compartment first. You can remove the lock cable from the lock cylinder when you spread the plastic cover with your flat tool tool and pull down. From the top of the lock release box take the lid off to view the remote release cable and detach it from the compartment box. Unplug the electrical connector from the compartment lid lock when present and remove the bolts which secure the lid. Pull the latch system out from the back door panel. Place the latch assembly in position based on the markings on the lid surface following the Fastener Notice in Service Precautions. Fasten the rear compartment lid latch bolts with a torque specification of 11 N.m (97 lb in). Install the remote release cable on the lock release box when available and join its electrical connector to the rear compartment lid latch. Press the rear compartment lid latch cable onto the lock cylinder and make sure it snaps into place.
Q: How to replace the rear trunk latch on Chevrolet SSR?
A: Start by lowering the endgate and opening the rear compartment lid before working on this task. To get to the latch inside the rear compartment grab the liner and pull back. Draw its spot with a grease pencil or marker ahead of taking out the part. Pull the tension off the latch cable and disconnect its electric connection point from the vehicle. Unfasten the latch holder screws and slowly take the latch away from its position at the vehicle for cable removal. When putting in the new latch you need to insert the electrical connector into its body opening then link the latch release cable before placing the latch at the marked spot. Secure both fasteners to 10 n.m (88 lb in) pressure before attaching the electric connector if the vehicle uses it. Secure the latch cable to proper position before placing back the rear compartment interior cover.