How to replace the upper and lower trunk latch on Chevrolet Astro?

To install new trunk/liftgate latches start by taking off the trim panels from both rear doors (Cargo Doors and E54). A soft scraper will help remove the water deflector piece from the door if needed. Pull away the control rods and clip from their lever position by pushing the clip past the lever and then gently removing the rod and its anchor point from the lock. Depress the upper latch screws and remove this component as well as the upper latch. Pull the assembled assembly out of the door. First uninstall lower latch screws and then take off both reinforcement and rod from the bottom of the door. Start by connecting remote lock clips before setting in place the lower latch rod assembly on the door. After that position the reinforcement piece. Secure both lower latch screws to 8 Newton-meter torque setting (71 pounds of force). Put the upper parts of the latch and rod into their door space with any included covers. Rotate the upper latch screws until they reach 10 N.m (88 lb in) of torque. Put the control rods through their clips into the remote lock followed by replacing the water deflector and trim panel.

OEM Chevrolet Astro Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Latches found

View related parts
Chevrolet Astro Crankshaft Position Sensor, Rear
Part Number: 25717076
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Power Steering Pump; Trunk Latch; Flex Hose; Manifold Gasket; Vapor Canister; Lock Assembly; Intermediate Pipe; Rear Flex Hose; Latch, Rear Lid Release
- Position: Rear
- Replaces: 25696865, 25707328
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Latch, Passenger Side
Part Number: 15713268
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet Astro | Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Latch, Driver Side
Part Number: 15713267
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1997 Chevrolet Astro | Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Latch, Passenger Side
Part Number: 15199991
Product Specifications
- Other Name: Latch Assembly-Lift Gate; Trunk Latch; Door Lock; Latch, End Gate Lock
- Position: Passenger Side
- Replaces: 15012925
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Astro Latch, Driver Side
Part Number: 15123706
Product Specifications
- Other Name: Latch Assembly-Lift Gate; Trunk Latch; Door Lock; Latch, End Gate Lock
- Position: Driver Side
- Replaces: 15012924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS

Chevrolet Astro Trunk Latch

Our website offers an extensive catalog of genuine Chevrolet Astro Trunk Latch at unbeatable prices. Every OEM Chevrolet Astro Trunk Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Astro Trunk Latch Parts Questions & Experts Answers

Latch, Driver Side
15123706
Q: How to replace the upper and lower trunk latch on Chevrolet Astro?
A: To install new trunk/liftgate latches start by taking off the trim panels from both rear doors (Cargo Doors and E54). A soft scraper will help remove the water deflector piece from the door if needed. Pull away the control rods and clip from their lever position by pushing the clip past the lever and then gently removing the rod and its anchor point from the lock. Depress the upper latch screws and remove this component as well as the upper latch. Pull the assembled assembly out of the door. First uninstall lower latch screws and then take off both reinforcement and rod from the bottom of the door. Start by connecting remote lock clips before setting in place the lower latch rod assembly on the door. After that position the reinforcement piece. Secure both lower latch screws to 8 Newton-meter torque setting (71 pounds of force). Put the upper parts of the latch and rod into their door space with any included covers. Rotate the upper latch screws until they reach 10 N.m (88 lb in) of torque. Put the control rods through their clips into the remote lock followed by replacing the water deflector and trim panel.