Other Name: Weatherstrip Assembly-Rear Door; Weatherstrip, Side Door Window Glass; Weatherstrip, Rear Door Opening
Position: Rear Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1994 Chevrolet Astro | Base, CL, CS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
Chevrolet Astro Weather Strip
Our website offers an extensive catalog of genuine Chevrolet Astro Weather Strip at unbeatable prices. Every OEM Chevrolet Astro Weather Strip comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Astro Weather Strip Parts Questions & Experts Answers
Q: How to replace the front door Weather Strip on Chevrolet Astro?
A: The first step to replace a front door weather strip involves removing the interior garnish moldings. You should start by using the Door Trim Pad and Garnish Clip Remover to extract the door weather strip from the body flange at its upper right corner that follows a clockwise direction through (6,5,4,3,2,1). Install the weather strip onto the body flange beginning at points 1, 2, 3, 4, 5, 6 while still leaving some pieces free so the length remains even around the door aperture. After positioning the weather strip 154 mm (6 in) from either side of the corner point on the body flange install it to the opening by hand. Using a rubber mallet to strike the weather strip against the flange at right angles will stop the carrier from spreading excessively and reducing retention. The rubber mallet must be used to place the thick flange areas at the hinge and windshield pillar locations and in each corner of the weather strip. The installation requires two critical factors: the weather strip should settle properly in the corner and match the body flange radius and the carrier should be fully seated onto the flange to produce a seamless door opening trim. Also ensure the carrier shows no signs of distortion and spreading out excessive and is not warped after installation and fully treated with GM weather strip silicone lube. Reinstall the interior garnish moldings as the final step.