Make sure this part fits

GM 15650743
Belt Weatherstrip, Driver Side

1985-2005 GM

Customer Questions & Expert Answers (15)
GM 15650743 Belt Weatherstrip, Driver Side
  • Part Description
    Seal, Body Side Window; Weatherstrip
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1985-2005 Chevrolet AstroBase, CL, CS, LS, LT4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
    1985-2005 GMC SafariBase, GT, SL, SLE, SLT, SLX4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15650743 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15650743 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool can be used if necessary to secure the weatherstrip for the 2002 Chevrolet Astro? Posted by Customer
    A:
    A rubber mallet can be used to secure it in the thicker flange areas and at each corner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step in the process for the 2001 Chevrolet Astro? Posted by Customer
    A:
    Install the plastic retainers into place, ensuring they are fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the weatherstrip on the swing out window for the 2003 Chevrolet Astro? Posted by Customer
    A:
    First, open the window and pull the weatherstrip from the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be partially attached during installation for the 2001 Chevrolet Astro? Posted by Customer
    A:
    Partially attach the weatherstrip to the body flange in six areas, ensuring the length is equally distributed around the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2000 Chevrolet Astro? Posted by Customer
    A:
    Ensure that its length is equally distributed around the door opening by partially attaching it to the pinchweld flange in six key areas.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door weatherstrip for the 2004 Chevrolet Astro? Posted by Customer
    A:
    Remove the necessary interior trim to access the weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be positioned during installation for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Position and install it by hand.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you replace the Front Side Door Upper Auxiliary Sealing Strip for the 2004 GMC Safari? Posted by Customer
    A:
    First, pull the molding from the molding flange and then remove the molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be applied to the weatherstrip after installation for the 2002 GMC Safari? Posted by Customer
    A:
    Ensure the weatherstrip is lubricated with GM weatherstrip silicone lube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the weatherstrip for the 2001 GMC Safari? Posted by Customer
    A:
    Pull the weatherstrip from the pinch-weld flange, starting at the upper right corner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the new weatherstrip be installed for the 2005 GMC Safari? Posted by Customer
    A:
    Ensure that its length is equally distributed around the door opening by partially attaching it to the pinchweld flange in six key areas.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the trim panels for the 2000 GMC Safari? Posted by Customer
    A:
    Remove the rear trim plate and pull the weatherstrip from the pinch-weld flange, starting at the upper right corner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be fitted to the opening for the 2004 GMC Safari? Posted by Customer
    A:
    Fit the weatherstrip to the opening by hand, seating it onto the pinchweld flange to approximately 154 mm (6 in) on each side of the corner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool may be necessary during the installation for the 2003 GMC Safari? Posted by Customer
    A:
    A rubber mallet may be necessary in the thick flange areas and corners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Belt Weatherstrip, Driver Side 15650743 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15650743 Belt Weatherstrip, Driver Side is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15650743 Belt Weatherstrip, Driver Side fits certain Chevrolet Astro models, as well as GMC Safari models.
The original GM component designated by manufacturer part number 15650743 maintains top performance when functioning as the Seal, Body Side Window; Weatherstrip unit at its Driver Side. The component 15650743 is constructed from durable material and its dimensions span 36.0 x 3.7 x 0.8 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sealing Strip, Side Door Window Glass. The part 15650743 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.