Other Name: Seal, Body Side Window; Weatherstrip; Sealing Strip, Side Door Window Glass
Position: Driver Side
Item Weight: 0.60 Pounds
Item Dimensions: 36.0 x 3.7 x 0.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15650743
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Chevrolet Astro Submodels:
Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
2001 Chevrolet Astro Weather Strip
With a comprehensive array of OEM 2001 Chevrolet Astro Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Astro Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Chevrolet Astro Weather Strip Parts and Q&A
Q: How to replace the front door Weather Strip on 2001 Chevrolet Astro?
A: The first step to replace a front door weather strip involves removing the interior garnish moldings. You should start by using the Door Trim Pad and Garnish Clip Remover to extract the door weather strip from the body flange at its upper right corner that follows a clockwise direction through (6,5,4,3,2,1). Install the weather strip onto the body flange beginning at points 1, 2, 3, 4, 5, 6 while still leaving some pieces free so the length remains even around the door aperture. After positioning the weather strip 154 mm (6 in) from either side of the corner point on the body flange install it to the opening by hand. Using a rubber mallet to strike the weather strip against the flange at right angles will stop the carrier from spreading excessively and reducing retention. The rubber mallet must be used to place the thick flange areas at the hinge and windshield pillar locations and in each corner of the weather strip. The installation requires two critical factors: the weather strip should settle properly in the corner and match the body flange radius and the carrier should be fully seated onto the flange to produce a seamless door opening trim. Also ensure the carrier shows no signs of distortion and spreading out excessive and is not warped after installation and fully treated with GM weather strip silicone lube. Reinstall the interior garnish moldings as the final step.