Other Name: Weatherstrip Assembly-Rear Door; Weatherstrip, Side Door Window Glass; Weatherstrip, Rear Door Opening
Position: Rear Driver Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1985-1994 GMC Safari | Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
GMC Safari Weather Strip
Our website offers an extensive catalog of genuine GMC Safari Weather Strip at unbeatable prices. Every OEM GMC Safari Weather Strip comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Safari Weather Strip Parts Questions & Experts Answers
Q: How to replace the front door opening Weather Strip on GMC Safari?
A: The first step to replace front door opening Weather Strip requires removal of interior garnish moldings. The door trim pad and garnish clip remover (J 38778) should be used to remove the Weather Strip from the door pinchweld flange started at the upper right corner until it is detached from the flange throughout its length. The Weather Strip length should be divided evenly around the door opening through partial attachment to pinweld flanges at 6 main locations. Hand-fitting this Weather Strip onto the pinchweld flange should begin at the intermediate points between the corners and extend to 154 mm (6 in) on either side of each corner. When using a rubber mallet to strike the Weather Strip at the flange it must be done carefully to prevent carrier spreading that weakens the retention effect. The rubber mallet should be used to install the Weather Strip at both corner positions and the pinchweld flange spots of the hinge and windshield pillars. The finishing inspection must verify that the Weather Strip fits properly into the corner while matching the pinchweld flange radius and completely rests on the flange for a smooth door opening shape. It should display no distorted or excessive carrier spreading and no kinks or bending after installation. Seal the Weather Strip with gm Weather Strip silicone lube before putting back the interior garnish moldings.