Captiva Sport | 2012-2015 | LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 6 Cyl 3.0 L FLEX
Equinox | 2007-2017 | L, LS, LT, LTZ, Premier, Sport | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
HHR | 2006-2011 | LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
Suburban 1500 | 2007-2014 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Suburban 2500 | 2007-2013 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
Tahoe | 2007-2014 | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Traverse | 2009-2017 | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock; Latch, Rear Compartment Lid Release Or Ajar; Rear Storage Compartment; Rear Hatch Window; Lift Gate
Position: Rear
Replaces: 13501988
Fits the following Chevrolet Models:
Camaro | 2010-2024 | LS, LT, LT1, SS, Z/28, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Corvette | 2014-2015 | Stingray, Z06 | 8 Cyl 6.2 L GAS
Cruze | 2011-2019 | Diesel, Eco, L, LS, LT, LTZ, Premier | 4 Cyl 1.4 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL
Cruze Limited | 2016 | Eco, L, LS, LT, LTZ | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
Impala | 2014-2020 | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
Malibu | 2013-2024 | Eco, Hybrid, L, LS, LT, LTZ, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
Malibu Limited | 2016 | LS, LT, LTZ | 4 Cyl 2.5 L GAS
Silverado 1500 | 2017-2018 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
Sonic | 2012-2020 | LS, LT, LTZ, Premier, RS | 4 Cyl 1.4 L GAS, 4 Cyl 1.8 L FLEX, 4 Cyl 1.8 L GAS
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 15817924, 25795316
Fits the following Chevrolet Models:
Impala | 2006-2013 | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
Q: How to replace the tailgate latch on a folding top on Chevrolet Camaro?
A: The tailgate latch replacement process starts with opening the rear compartment lid and applying grease pencil marks to identify the latch position on the lid. Disengage the electrical connectors from both the rear compartment lid latch and from the lock cylinder actuator cable which attaches to the lock cylinder. Start by removing the nuts that connect the rear compartment lid latch to the lid and then take out the latch itself. Install the new rear compartment lid latch by aligning its marks first then secure it according to the fastener notice instructions. Screw in the nuts to 10 N.m tension (89 lb in) before connecting electrical connectors together with the lock cylinder actuator cable. You must close the rear compartment lid as the last step.
Q: How to replace the tailgate latch on Chevrolet SSR?
A: Open the rear compartment lid while lowering the endgate to begin replacing the tailgate latch. Begin the installation by removing the endgate access panel followed by the endgate liner in the rear compartment. Start by removing the endgate latch fasteners and extracting the endgate latch from the vehicle and finally disconnect the latch release rod from the endgate latch. The installation process requires you to attach the latch release rod to the latch before putting the endgate latch into the endgate. Secure endgate fasteners at 10 N.m (88 lb in) torque. Place the rear compartment endgate liner down first followed by reinstalling the endgate access panel then close both the endgate and rear compartment lid.
Q: How to replace the tailgate latch on the left lower end on Chevrolet Trailblazer?
A: The process starts with tailgate swinging open and removing the tailgate trim panel then proceeding to remove the tailgate inner reinforcement panel. Start by removing screws that hold the latch assembly to the tailgate followed by disconnecting the electrical connector from the latch until you can remove it from the tailgate. Position the latch so it fits onto the tailgate before connecting its electrical connector to the latch assembly. Add screws that retain the latch assembly to the tailgate while tightening them to 10 N.m (89 lb in). The tailgate trim panel together with the tailgate inner reinforcement panel need to be reinstalled.