How to replace the rear trunk latch on Chevrolet SSR?

Before you start use the rear compartment lid and endgate opening. Open the rear compartment lid and lower the endgate first so you can reach the latch which you need to mark with a pencil before removing it. Regulate tension on the cable and detach the electrical connector for the rear compartment lid if your vehicle has this feature. Detach the removables and instantly pull the latch out of its place without disconnecting the latch release cable. Put the electrical connector of the new latch into the body opening then link the latch release cable before putting the latch on and fitting it correctly at the marked spot. Fasten the parts in place with 10 n.m torque before reattaching the electrical connector on the disabled vehicle. Pull the latch cable into place before realigning the back storage compartment and fitting the endgate panel. Finally put the rear compartment lid back on.

OEM Chevrolet SSR Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Trunk Latches found

View related parts
Chevrolet SSR Door Jamb Switch
Part Number: 25664288
$66.92 MSRP: $128.76
You Save: $61.84 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
- Position: Rear
- Replaces: 16627973, 25664020, 16632015, 16636561, 22144363, 3635350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Lock, Driver Side
Part Number: 15175759
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Lock, Passenger Side
Part Number: 15175758
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Lock, Driver Side
Part Number: 15133896
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Lock, Passenger Side
Part Number: 15133895
Product Specifications
- Other Name: Latch, End Gate Lock; Trunk Latch; Door Lock; Latch
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet SSR Trunk Latch

Our website offers an extensive catalog of genuine Chevrolet SSR Trunk Latch at unbeatable prices. Every OEM Chevrolet SSR Trunk Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet SSR Trunk Latch Parts Questions & Experts Answers

Door Jamb Switch
25664288
Q: How to replace the rear trunk latch on Chevrolet SSR?
A: Before you start use the rear compartment lid and endgate opening. Open the rear compartment lid and lower the endgate first so you can reach the latch which you need to mark with a pencil before removing it. Regulate tension on the cable and detach the electrical connector for the rear compartment lid if your vehicle has this feature. Detach the removables and instantly pull the latch out of its place without disconnecting the latch release cable. Put the electrical connector of the new latch into the body opening then link the latch release cable before putting the latch on and fitting it correctly at the marked spot. Fasten the parts in place with 10 n.m torque before reattaching the electrical connector on the disabled vehicle. Pull the latch cable into place before realigning the back storage compartment and fitting the endgate panel. Finally put the rear compartment lid back on.