Q: How to replace the Window Crank Handles on the door on Chevrolet Colorado?
A: You should start your window crank handle replacement by lifting the window completely up. Place the Door Handle Clip Remover (J 9886-01) at the handle edge between its base and white plastic washer. Position the tool alongside the handle then push it to break the retaining clip loose. Pull the handle from the door after disconnecting the clip then take off the bearing plate. Put the window into its highest position before placing the washer over the regulator shaft and fixing the clip onto the handle base. Put the window crank handle in a 50-degree forward position and push firmly to connect the clip to the shaft.
Q: How to replace the door window crank handles on Chevrolet Malibu?
A: First use tool J 9886-01 called Door Handle Clip Remover to detach the spring clip by inserting it between the door window crank handle and its support plate. Extract the door window crank handle through its outward slide motion before removing the door window crank handle bearing plate. Set the window to its highest position and put the clip on the door window crank handle. Fit the door window crank handle bearing plate first and slip the window crank handle into position before pressing it towards the holder.
Q: How to replace the front door window crank handles on Chevrolet Tracker?
A: Using a cloth you can separate the snap ring from the window crank handle before taking out the handle. Before installing, assemble the snap ring to the window crank handle first. Then put the window crank handle on the door.