How to Service and Repair a Tailgate Handle on Chevrolet Colorado?

Start by removing the endgate cover before beginning tailgate handle replacement. After removing the endgate latch rods from their retaining clips users can detach the clips. You should extract the bolts that fasten the endgate handle to the endgate before you can remove the handle. Remove the endgate handle lock cylinder when equipped. Reattach the lock cylinder into the endgate handle when equipped before attaching the handle to the endgate. After handle installation make sure to fasten its securing bolts with 9 Nm (80 lb in) torque. Reinstall endgate latch rods into retaining clips on endgate handle which needs clips to attach the rods. Finally, reinstall the endgate cover.

How to Service and Repair the Tailgate Handle on Chevrolet SSR?

You first need to open the rear compartment lid to lower the tailgate. Uninstall the liner behind the rear lid and the service panel next to this section. First you need to uninstall both the bell crank and tailgate handle fasteners before taking out the tailgate handle from the rear compartment tailgate access panel. Fit the tailgate handle back into the rear compartment access panel and secure it with tight tailgate handle fasteners at 7 N.m (61 lb in). Place the bell crank in position and fix the fastener at 5 N.m (44 lb in). Put back both the rear compartment tailgate access panel and the rear tailgate liner at the same time. After that complete both inner and outer cargo areas.

How to replace the tailgate handle on a pickup on Chevrolet S10?

You need a flat-blade tool to remove the pickup box endgate handle bezel before taking out the endgate bedliner. The bolts which grip the pickup box endgate handle to the endgate should be taken out. When you raise the endgate handle you will find access to its lower latch rod retaining clip which you can then disconnect to slide out the rod. Position the lower handle downward until you can reach the upper latch rod retaining clip. Disconnect this clip and slide the upper latch rod out. Begin installation of the new pickup box endgate handle by placing the handle in an upward position to insert the lower latch rod into the retaining clip and reattach the clip. Next lower the handle to insert the upper latch rod and reconnect its retaining clip. Fasten the pickup box endgate handle onto the endgate through bolting while tightening the fasteners to 25 N.m (18 lb ft). Once complete, reinstall the endgate bedliner and fit the endgate handle bezel around the handle before pressing the bezel until retainers fully settle into position.

OEM Chevrolet Tailgate Handle

Back Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

104 Tailgate Handles found

View related parts
Chevrolet Handle
Part Number: 84966930
$148.63 MSRP: $222.21
You Save: $73.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 86596330
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2023 | High Country, LT, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle, Black
Part Number: 84809856
$134.38 MSRP: $200.91
You Save: $66.53 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 86789893
Fits the following Chevrolet Models:
- Silverado 1500 | 2019-2022 | High Country, LTZ, ZR2 | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 1500 LTD | 2022 | High Country, LTZ | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Handle, Black
Part Number: 86789899
$128.94 MSRP: $189.37
You Save: $60.43 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626242
Fits the following Chevrolet Models:
- Silverado 1500 | 2020-2022 | High Country, LTZ | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 1500 LTD | 2022 | High Country, LTZ | 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 2500 HD | 2020-2023 | High Country, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | High Country, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View More
View related parts
Chevrolet Handle, Black
Part Number: 86789906
$100.87 MSRP: $145.58
You Save: $44.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 86519124
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Handle, Black
Part Number: 84865583
$110.25 MSRP: $160.52
You Save: $50.27 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaces: 84472460, 84472398, 84809853
Fits the following Chevrolet Models:
- Silverado 1500 | 2019-2022 | WT | 4 Cyl 2.7 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 LD | 2019 | WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 LTD | 2022 | WT | 4 Cyl 2.7 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View More
View related parts
Chevrolet Handle, Rear
Part Number: 22837592
$177.29 MSRP: $265.05
You Save: $87.76 (34%)
ADD TO CART
Product Specifications
- Other Name: Handle, Rear Compartment Lid Or Tail Gate Latch
- Position: Rear
- Replaces: 20793958
Fits the following Chevrolet Models:
- Volt | 2011-2019 | Base, LT, Premier | 4 Cyl 1.4 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 1.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chevrolet Handle
Part Number: 86789907
$137.41 MSRP: $205.44
You Save: $68.03 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 86519125
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Handle, Outside
Part Number: 25838218
$136.03 MSRP: $198.04
You Save: $62.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock; Tailgate Handle
- Replaces: 15842442
Fits the following Chevrolet Models:
- Suburban 1500 | 2007-2014 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Suburban 2500 | 2007-2013 | LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Tahoe | 2007-2014 | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View More
View related parts
Chevrolet Handle, Black
Part Number: 86789903
$159.43 MSRP: $238.36
You Save: $78.93 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626246
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Handle
Part Number: 85116689
$197.38 MSRP: $295.09
You Save: $97.71 (34%)
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Pick Up Box Auxiliary End Gate Step
- Replaced by: 86530678
Fits the following Chevrolet Models:
- Silverado 1500 | 2019-2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 1500 LD | 2019 | Custom, LT, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
- Silverado 1500 LTD | 2022 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST, SSV, WT | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 3500 HD | 2021-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More
View related parts
Chevrolet Handle
Part Number: 85532580
$134.70 MSRP: $201.39
You Save: $66.69 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626244
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2022-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 84758064
$161.41 MSRP: $241.31
You Save: $79.90 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626241
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2023 | Custom, LT, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | LT, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 85626248
$148.98 MSRP: $222.73
You Save: $73.75 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 86586088
- Replaces: 85607495
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2024 | High Country, LT, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2024 | High Country, LT, LTZ | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 86789902
$175.72 MSRP: $262.72
You Save: $87.00 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626245
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Handle
Part Number: 84966931
$111.19 MSRP: $160.48
You Save: $49.29 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626243
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2022-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2021-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 84762645
$121.55 MSRP: $181.72
You Save: $60.17 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2023 | Custom, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2023 | LT, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 84368995
$47.25 MSRP: $68.80
You Save: $21.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock; Handle, End Gate Or Back Door
Fits the following Chevrolet Models:
- Colorado | 2019 | LT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Handle
Part Number: 84634465
Product Specifications
- Other Name: Handle, End Gate Lock
Fits the following Chevrolet Models:
- Silverado 3500 HD | 2020-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 84758069
$175.72 MSRP: $262.72
You Save: $87.00 (34%)
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaced by: 85626245
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2022-2023 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2021-2023 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Handle
Part Number: 86519125
$137.41 MSRP: $205.44
You Save: $68.03 (34%)
Product Specifications
- Other Name: Handle, End Gate Lock
- Replaces: 86789907, 85537877
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
- Silverado 2500 HD | 2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2024 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View More

| Page 1 of 6 |Next >

1-20 of 104 Results

Chevrolet Tailgate Handle Parts Questions & Experts Answers

Handle, Dark Smoke Gray
25801998
Q: How to Service and Repair a Tailgate Handle on Chevrolet Colorado?
A: Start by removing the endgate cover before beginning tailgate handle replacement. After removing the endgate latch rods from their retaining clips users can detach the clips. You should extract the bolts that fasten the endgate handle to the endgate before you can remove the handle. Remove the endgate handle lock cylinder when equipped. Reattach the lock cylinder into the endgate handle when equipped before attaching the handle to the endgate. After handle installation make sure to fasten its securing bolts with 9 Nm (80 lb in) torque. Reinstall endgate latch rods into retaining clips on endgate handle which needs clips to attach the rods. Finally, reinstall the endgate cover.
Release Handle
15145591
Q: How to Service and Repair the Tailgate Handle on Chevrolet SSR?
A: You first need to open the rear compartment lid to lower the tailgate. Uninstall the liner behind the rear lid and the service panel next to this section. First you need to uninstall both the bell crank and tailgate handle fasteners before taking out the tailgate handle from the rear compartment tailgate access panel. Fit the tailgate handle back into the rear compartment access panel and secure it with tight tailgate handle fasteners at 7 N.m (61 lb in). Place the bell crank in position and fix the fastener at 5 N.m (44 lb in). Put back both the rear compartment tailgate access panel and the rear tailgate liner at the same time. After that complete both inner and outer cargo areas.
Handle
15007218
Q: How to replace the tailgate handle on a pickup on Chevrolet S10?
A: You need a flat-blade tool to remove the pickup box endgate handle bezel before taking out the endgate bedliner. The bolts which grip the pickup box endgate handle to the endgate should be taken out. When you raise the endgate handle you will find access to its lower latch rod retaining clip which you can then disconnect to slide out the rod. Position the lower handle downward until you can reach the upper latch rod retaining clip. Disconnect this clip and slide the upper latch rod out. Begin installation of the new pickup box endgate handle by placing the handle in an upward position to insert the lower latch rod into the retaining clip and reattach the clip. Next lower the handle to insert the upper latch rod and reconnect its retaining clip. Fasten the pickup box endgate handle onto the endgate through bolting while tightening the fasteners to 25 N.m (18 lb ft). Once complete, reinstall the endgate bedliner and fit the endgate handle bezel around the handle before pressing the bezel until retainers fully settle into position.