GM 25894546
Wheelhouse Liner, Passenger Side

The procedure to replace the front fender splash shield starts by raising the vehicle for support and ends with removing the tire and wheel assembly. Pull the push-pins from the inner fender splash shield followed by removing it from the vehicle. The procedure to remove the outer fender splash shield begins with removing its push-pins followed by its extraction from the wheelhouse. The outer fender splash shield must be fitted first then a rearward push-pin inserted into it followed by installing the remaining push-pins into the splash shield. You should now install the inner fender splash shield to the vehicle before using push-pins for attachment. Finish installation by reinstalling the tire-wheel assembly then lowering the vehicle.

The first step to install the wheelhouse splash shield requires vehicle lift and support before proceeding. Start by removing both the wheel along with the tire assembly. Start by removing push-pins from the inner wheelhouse splash shield before carefully pulling off the splash shield from the vehicle. First remove the push-pins from the outer wheelhouse splash shield before you can detach the outer wheelhouse splash shield from the vehicle. First install the outer wheelhouse splash shield on the vehicle before inserting the rearward push-pin then adding the remainder of the push-pins. Fasten the inner wheelhouse splash shield to the vehicle through use of the push-pins. Complete the process by replacing the tire along with its wheel assembly after you lower the vehicle.

The first step to replace a front fender splash shield is to lift and securely position the vehicle. Uninstall both the tire along with the wheel from the vehicle. Proceed by removing the push-pins from the inner fender splash shield before taking out the splash shield from the vehicle. You should now remove the push-pins from the outer fender splash shield before pulling out the outer fender splash shield. Start with outer fender splash shield installation on the vehicle followed by the rearward push-pin to the outer fender splash shield then continue with the rest of push-pins to the outer fender splash shield. You should install the inner fender splash shield onto the vehicle while using push-pins for fastening. After the process is complete you must reinstall the tire along with the wheel assembly before lowering the vehicle.

The first step to replace front fender splash shield begins with vehicle support and lift. The first step requires tire and wheel assembly removal. Begin by removing the push-pins from the inner fender splash shield and afterwards extracting the splash shield from inside the vehicle. Afterward remove push-pins from the outer fender splash shield before removing it. The installation process starts with placing the outer fender splash shield onto the vehicle and then inserting the rearward push-pin followed by the remaining push-pins. The installer should place and fasten the inner fender splash shield onto the vehicle through its push-pins. Reposition the tire before lowering the vehicle after reinstalling the tire and wheel assembly.

Raise and support the vehicle.