Make sure this part fits

GM 97363568
Manifold

2006-2007 GM

Customer Questions & Expert Answers (7)
GM 97363568 Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Position
    Center
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number97363568
    Part DescriptionManifold, Engine Fuel Intake Manifold
    Other NamesIntake Manifold
    Item Dimensions7.0 x 6.6 x 4.5 inches
    Item Weight2.40 Pounds
    PositionCenter
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU97363568
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Chevrolet Silverado 2500 HDLS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2006 Chevrolet Silverado 3500LS, LT, WT8 Cyl 6.6 L DIESEL
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.6 L DIESEL
    2006 GMC Sierra 2500 HDSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    2007 GMC Sierra 2500 HD ClassicSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    2006 GMC Sierra 3500SL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
    2007 GMC Sierra 3500 ClassicSL, SLE, SLT, WT8 Cyl 6.6 L DIESEL
  • Customer Questions & Expert Answers

    Q:
    Hey, is 97363568 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 97363568 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the upper intake manifold sight shield on 4.8L, 5.3L, and 6.0L (RPO LQ4) engines for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    First, loosen the intake manifold sight shield bolt and remove the sight shield from the sight shield retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be detached if it has vacuum assisted brakes for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Detach the vacuum brake booster hose from the rear of the intake manifold, followed by the positive crankcase ventilation (PCV) hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be disconnected after removing the throttle body and fuel injectors for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Disconnect the manifold absolute pressure (MAP) sensor and knock sensor electrical connectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    Which electrical connectors need to be disconnected for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Disconnect the engine harness electrical connectors from the EVAP canister purge solenoid, manifold absolute pressure (MAP) sensor, ignition coil harness, left side fuel injectors, throttle actuator, right side fuel injectors, and engine coolant temperature (ECT) sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the engine harness clips for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Remove the engine harness clips (4, 6, 1) and gather the harness branches to tie them up out of the way.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done with the intake manifold side gaskets and end seals for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Discard the intake manifold side gaskets and end seals, and carefully remove the splash shield, which is reusable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 97363568, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 97363568 Manifold. It is sometimes referred to as GM Intake Manifold. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 97363568 Manifold. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery