Make sure this part fits

GM 94859378
Muffler W/Tpipe

2000-2002 Chevrolet Prizm

Customer Questions & Expert Answers (7)
GM 94859378 Muffler W/Tpipe
  • Part Description
    Muffler, Exhaust (W/Tail Pipe); Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
  • Manufacturer
    General Motors
Make sure this part fits
$63.97 MSRP: $451.48
You Save: $387.51 (86%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number94859378
    Part DescriptionMuffler, Exhaust (W/Tail Pipe); Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
    Item Dimensions32.8 x 13.8 x 6.2 inches
    Item Weight17.50 Pounds
    ConditionNew
    ManufacturerGeneral Motors
    SKU94859378
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2002 Chevrolet PrizmBase, LSi4 Cyl 1.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94859378 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94859378 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the muffler on Chevrolet Prizm? Posted by Customer
    A:
    The first step for replacing a Muffler requires vehicle elevation and appropriate support. Start by taking out the gasket and two bolts securing the front pipe/three-way Catalytic Converter (TWC) assembly then deal with the two bolts and hanger on the Muffler. Before installation begin by taking out the Muffler/tail pipe assembly from your vehicle while you clean the areas where the seals connect. To install the Muffler/tail pipe assembly bolt it up to the front pipe/twc assembly with a new gasket using two bolts while you should tighten them lightly with your fingers. After applying the hanger to the Muffler you should bolt it down using finger tight bolts. Begin by double-checking system component alignment for silence and vibration prevention before you tighten fasteners. Finally, use a torque wrench to bolt the twc-to-Muffler/tail pipe assembly components to 50 nm (37 ft. Lbs.) and tighten hanger bolts to 13 nm (115 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the Exhaust Pipe on Chevrolet Prizm? Posted by Customer
    A:
    Before working on the Exhaust Pipe the technician needs to raise and support the vehicle. Cut the heated Oxygen Sensor 1 loose before removing two Exhaust Manifold bolts and the two springs from the Exhaust Manifold. Detaching the clamp and one bolt permits removal of the front pipe from its position between the front pipe and three way Catalytic Converter (TWC). Wash the gasket material and apply a new gasket when putting back the front pipe. Use the two springs and two bolts to connect the front pipe to the manifold before initial fastening by hand. You must next attach the front pipe onto the twc by installing a new seal along with one clamp and bolt while performing finger tightening on the bolt. All system components need proper alignment to avoid noise and vibrations during fastener tightening. The front pipe-to-exhaust manifold bolts should be tightened to 50nm (37 ft. Lbs.) while the front pipe-to-twc clamp bolt receives 50 nm (37 ft. Lbs.). Lower the vehicle after finishing the installation of heated Oxygen Sensor 1.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to the front pipe's connection to the Three Way Catalytic Converter (TWC) for the 2002 Chevrolet Prizm? Posted by Customer
    A:
    Take off the one bolt and the clamp that secure the front pipe to the TWC.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    What components need to be taken off from the exhaust manifold for the 2001 Chevrolet Prizm? Posted by Customer
    A:
    Remove the two bolts and two springs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Pipe
    Q:
    How do you install the new muffler/tail pipe assembly for the 2002 Chevrolet Prizm? Posted by Customer
    A:
    Connect the muffler/tail pipe assembly with a new gasket to the front pipe TWC assembly and secure it with 2 bolts, finger tightening them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Muffler
    Q:
    What is the torque specification for both hanger bolts for the 2000 Chevrolet Prizm? Posted by Customer
    A:
    Tighten to 13 Nm (115 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Muffler
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 94859378, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 94859378 Muffler W/Tpipe. It is sometimes referred to as GM Exhaust Pipe, GM Muffler. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 94859378 Muffler W/Tpipe. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery