Make sure this part fits

GM 19207501
Brake Pads, Front

2006-2012 GM

Customer Questions & Expert Answers (7)
GM 19207501 Brake Pads, Front
GM 19207501 Brake Pads, Front
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaces
    15270292
  • Manufacturer
    General Motors
Make sure this part fits
$97.72 MSRP: $174.49
You Save: $76.77 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19207501
    Part DescriptionPad Kit, Front Disc Brake; Disc Brake Hardware Kit
    Other NamesFront Pads; Pad Kit, Brake
    Item Dimensions9.3 x 4.8 x 3.8 inches
    Item Weight5.20 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces15270292
    ManufacturerGeneral Motors
    SKU19207501
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2006-2012 Chevrolet Impala50th Anniversary Edition, LS, LT, LTZ, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2006-2007 Chevrolet Monte CarloLS, LT, LTZ, SS6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19207501 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19207501 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Is Burnishing the Brake Pads and Brake Disc Essential After Servicing the Disc Brake System on Buick Lucerne? Posted by Customer
    A:
    You need to burnish brake surfaces after servicing because this step prepares braking components following all brakes work. Pick a quiet road for low traffic and drive your vehicle up to 48 km/h (30 mph) before gently applying the brakes to prevent overheating. Press the brake pedals steadily to slow the vehicle down balanced between soft and tough stopping points. Perform these brake activations and decelerations eighteen times before letting the brakes cool down properly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after removing the wheel lug nut retaining the rotor for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Install the rear tire and wheel assembly, aligning the previous marks, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you prepare the rotor for brake pad replacement for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Install a hand-tightened lug nut to retain the rotor to the hub, and compress the caliper piston using a C-clamp for clearance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you ensure the brake caliper pistons and pads are properly seated for the 2009 Chevrolet Impala? Posted by Customer
    A:
    With the engine off, gradually apply the brake pedal to about 2/3 of its travel, then slowly release it. Wait 15 seconds and repeat until a firm pedal is achieved.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the procedure for installing the new brake pads for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Bottom the piston into the caliper bore using a C-clamp and an old brake pad or wooden block to protect the piston and boot. Install the 2 retainers to the caliper bracket, ensuring the wear sensor is positioned correctly on the outside pad. Install the pads to the caliper bracket, then swing the caliper upward around the pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be inspected during the brake pad replacement for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Inspect the caliper mounting hardware and dust boot for cuts, tears, or deterioration, replacing any damaged components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19207501, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19207501 Brake Pads, Front. It is sometimes referred to as GM Brake Pad. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19207501 Brake Pads, Front. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery