Make sure this part fits

GM 89047725
Brake Pads

2004-2011 GM

Customer Questions & Expert Answers (13)
GM 89047725 Brake Pads
GM 89047725 Brake Pads
  • Part Description
    Pad Kit, Front Disc Brake; Disc Brake Hardware Kit
  • Position
    Front
  • Replaced By
    19433360
  • Manufacturer
    General Motors
Make sure this part fits
$149.86 MSRP: $411.92
You Save: $262.06 (64%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSV8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2010 Chevrolet CamaroSS8 Cyl 6.2 L GAS
    2009 Pontiac G8GXP8 Cyl 6.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 89047725 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89047725 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you prepare the caliper piston for installation for the 2006 Cadillac CTS? Posted by Customer
    A:
    Use the large C-clamp again to compress the caliper piston completely into the bore.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What are the final steps after reattaching the caliper for the 2005 Cadillac CTS? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, lower the vehicle, and with the engine off, gradually apply the brake pedal to about two-thirds of its travel, then slowly release it. Repeat this process until a firm brake pedal is achieved, then fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after installing the caliper guide pins for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the tire and wheel assembly, lower the vehicle, and with the engine off, gradually apply the brake pedal to about 2/3 of its travel, then slowly release it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the final step in the brake pad replacement process for the 2004 Cadillac CTS? Posted by Customer
    A:
    Wait 15 seconds and repeat the brake pedal application until a firm brake pedal is achieved, then fill the brake master cylinder reservoir to the proper level and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after removing the lower caliper guide pin for the 2005 Cadillac STS? Posted by Customer
    A:
    Rotate the brake pad retainer upward and remove it, then tap the upper caliper to brake pad mounting pin inward out of the caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you install the new brake pads for the 2010 Cadillac STS? Posted by Customer
    A:
    Install the new brake pads into the caliper, then install the upper caliper guide pin through the caliper and brake pads, seating it with a hammer and punch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you install the new brake pads for the 2009 Cadillac STS? Posted by Customer
    A:
    Install the new brake pads into the caliper, then install the upper caliper guide pin through the caliper and brake pads, seating it with a hammer and punch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after reinstalling the tire and wheel assembly for the 2008 Cadillac STS? Posted by Customer
    A:
    Lower the vehicle, and with the engine off, gradually apply the brake pedal to about 2/3 of its travel, then slowly release it. Wait 15 seconds and repeat until a firm brake pedal is achieved.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2009 Cadillac STS? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you support the caliper during the process for the 2006 Cadillac STS? Posted by Customer
    A:
    Pivot the caliper upward and support it with heavy mechanic's wire to avoid tension on the hydraulic brake flexible hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should you do if the fluid level is higher than midway for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Reduce it to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step to replace the rear disc brake pads for the 2007 Cadillac STS? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point between the maximum and minimum levels, remove fluid to reach the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 89047725 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 89047725 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 89047725 Brake Pads fits certain Chevrolet Camaro models, as well as Cadillac CTS, STS. Additionally, it is compatible with Pontiac G8 models.
The original GM component designated by manufacturer part number 89047725 maintains top performance when functioning as the Pad Kit, Front Disc Brake; Disc Brake Hardware Kit unit at its Front. The component 89047725 is constructed from durable material and its dimensions span 9.8 x 6.6 x 3.3 inches while weighing 4.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Front Pads; Pad Kit, Brake. The part 89047725 has available replacement options listed under 19433360. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.