Make sure this part fits

GM 88951171
Lap & Shoulder Belt, Dark Gray

2000-2005 GM

Customer Questions & Expert Answers (7)
GM 88951171 Lap & Shoulder Belt, Dark Gray
GM 88951171 Lap & Shoulder Belt, Dark Gray
  • Part Description
    Belt Kit, Seat Belt
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88951171
    Part DescriptionBelt Kit, Seat Belt
    Other NamesRetractor Assembly; Belt & Retractor
    Item Dimensions6.2 x 4.7 x 11.3 inches
    Item Weight3.40 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU88951171
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2001-2003 Oldsmobile AuroraBase6 Cyl 3.5 L GAS, 8 Cyl 4.0 L GAS
    2000-2005 Pontiac BonnevilleGXP, SE, SLE, SSEi6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88951171 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88951171 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the center rear seat belt on Buick LeSabre? Posted by Customer
    A:
    Begin replacing the center rear Seat Belt by first uninstalling the rear seat cushion and pulling out the center rear Seat Belt anchor fastener which is located on the floor. Begin with removing the rear seat back followed by removing the push-in retainers securing the rear shelf trim. Use upward force on the front corner of the center shoulder belt escutcheon to release it while you should lift the rear shelf trim panel carefully to view the retractor fastener which must be removed. You will need to remove the front rear compartment trim panel afterward to pull the retractor through the rear compartment and set the center shoulder belt and escutcheon into the rear shelf trim panel opening. Start by running the rear seat center shoulder belt and escutcheon through the opening in the rear shelf trim panel from the rear compartment and afterward install the retractor to the cross brace. Lift the rear shelf trim panel with care before installing the center rear Seat Belt retractor fastener on the inside of the vehicle while tightening it to 41 n.m (30 lb ft). Proceed by inserting the push-in fastener into the rear shelf trim panel and afterwards fix the center rear Seat Belt escutcheon to the rear shelf opening before reinstating the rear seat back. Affix the center rear Seat Belt anchor fastener to the floor while tightening it to 41 n.m (30 lb ft) before replacing the rear seat cushion.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the retractor fastener for the 2003 Buick LeSabre? Posted by Customer
    A:
    Take out the front rear compartment trim panel and remove the retractor through the rear compartment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What should be done after securing the retractor for the 2002 Buick LeSabre? Posted by Customer
    A:
    Secure the rear shelf trim panel with the push-in fastener, install the center rear seat belt escutcheon, and then reinstall the rear seat back.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What is the first step to replace the front seat belt for the 2003 Buick LeSabre? Posted by Customer
    A:
    Begin by removing the seat belt tower rear trim cover, ensuring to observe SIR Caution in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What are the final steps after installing the retractor components for the 2005 Buick LeSabre? Posted by Customer
    A:
    Reinstall the tower front trim cover fasteners, the seat back cover, and the seat belt tower rear cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    Q:
    What conditions indicate that a seat belt system should be replaced for the 2004 Buick LeSabre? Posted by Customer
    A:
    If it has torn, worn, or damaged components, or if the words "REPLACE" or "CAUTION" are visible, or if a yellow tag is present.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Seat Belt
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88951171, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88951171 Lap & Shoulder Belt, Dark Gray. It is sometimes referred to as GM Seat Belt. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88951171 Lap & Shoulder Belt, Dark Gray. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery