Make sure this part fits

GM 15124302
Filler Neck

2003-2004 GM

Customer Questions & Expert Answers (3)
GM 15124302 Filler Neck
  • Part Description
    Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15124302
    Part DescriptionPipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
    Other NamesPipe, Fuel Tank Filler
    Item Dimensions23.5 x 6.5 x 7.0 inches
    Item Weight3.00 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15124302
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2004 Chevrolet S10Base, LS, ZR54 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    2003-2004 GMC SonomaSL, SLS4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15124302 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15124302 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel filler hose on Chevrolet S10? Posted by Customer
    A:
    Begin the Fuel Filler Hose replacement by disconnecting the negative Battery Cable followed by removal of the fuel filler pipe. Start by draining fuel until it sits lower than the fuel fill opening before you clean the vent hose point at the Fuel Tank and remove the vent hose along with its clamp . The next step involves cleaning the Fuel Filler Hose connection on the Fuel Tank before disconnection of both hose components and the clamp. The Fuel Tank must receive sealing caps to stop unwanted infiltration. Installation requires removal of Fuel Tank caps followed by fuel hose connection to the tank with clamp tightening to 1.7 n.m for the vent hose and 2.5 n.m for the fuel fill hose. The process ends with installation of the filler pipe followed by refilling the system and installing the cap before Battery Cable reconnection and leak inspection.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the fuel filler hose on GMC Sonoma? Posted by Customer
    A:
    The first step to replace the Fuel Filler Hose starts with disconnecting the negative Battery Cable while removing the fuel filler cap. The procedure starts by unscrewing the fuel filler pipe attachers which holds the fill pipe housing before lifting the vehicle. An approved gasoline drain container should rest underneath the fuel filler pipe while you disconnect the filler pipe ground strap. Begin by wiping down the vent hose connection and moving the vent hose clamp until loose before cleaning the Fuel Filler Hose connection and subsequently loose its clamp. Initial contamination prevention requires you to detach the Fuel Filler Hose and vent hose followed by capping them off. To install the fuel filler pipe, users need to remove protective caps from the Fuel Filler Hose and vent hose after which they should assemble the filler pipe to the fuel tank fill and vent hoses and the fill pipe housing while maintaining correct alignment with the filler pipe housing. Toe tighten the fill hose clamp to 2.5 n.m (22 lb in) without threading over its specified limit. Tighten the filler pipe ground strap bolt to 15 n.m (11 lb ft) while attaching a washer on the frame's surface. Install the fuel filler pipe to fill pipe housing using attaching screws before tightening them to 1.9 n.m (17 lb in). Afterward install the fuel filler cap while reestablishing the negative Battery Cable connection and check for any sign of leakage.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15124302, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15124302 Filler Neck. It is sometimes referred to as GM Fuel Filler Hose, GM Fuel Tank Filler Neck. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15124302 Filler Neck. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery