Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 13500114
Circuit Breaker

1994-2024 GM

Customer Questions & Expert Answers (71)
GM 13500114 Circuit Breaker
GM 13500114 Circuit Breaker
GM 13500114 Circuit Breaker
GM 13500114 Circuit Breaker
GM 13500114 Circuit Breaker
  • Part Description
    Relay Assembly, Accessory Time Delay *Gray; DRL, Rear Defroster, Multi-Purpose, Fog, Fuel Pump, Headlight, ABS, Flasher
  • Replaces
    12088567, 12135170, 19116057, 92199312, 12193606, 12135034, 19115080, 15328866, 15393412
  • Manufacturer
    General Motors
Make sure this part fits
$11.69 MSRP: $20.88
You Save: $9.19 (45%)
Ships in 1-2 Business Days
1
ADD TO CART
  • 1995 Buick Riviera Circuit Breaker Diagram for 13500114
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 13500114

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2008-2021 Buick EnclaveAvenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium6 Cyl 3.6 L GAS
    2016-2019 Buick EncoreEssence, Preferred, Preferred II, Premium, Sport Touring4 Cyl 1.4 L GAS
    2005-2019 Buick LaCrosseAvenir, Base, Convenience, CX, CXL, CXS, Essence, Leather, Preferred, Premium, Sport Touring, Super, Touring4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1995-2005 Buick LeSabreCustom, Limited6 Cyl 3.8 L GAS
    2008-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    1994-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    1994-2004 Buick Regal25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 13500114 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 13500114 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the headlight relay on Cadillac Eldorado? Posted by Customer
    A:
    Commence the headlamp relay replacement by opening the hood then removing the washer hose before taking out the retainer clip of the cruise control cable. First remove the multi-use relay and fuse bracket cover as well as electrical tape from the relays. The Relay Puller Pliers (J 43244) must be used to draw out the failed headlamp relay from the multi-use relay and fuse center before removal of the relay. Installation of the new headlamp relay should begin with using Relay Puller Pliers (J 43244) to insert the component into the multi-use relay and fuse center followed by wrapping the relays with new electrical tape. Place the multi-use relay and fuse bracket cover onto the bracket then fasten it with the clips. Fasten the cruise control cable to the retention clip which sits on the left strut tower while securing it. The washer solvent hose installation needs completion before you close the hood.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Buick Lucerne? Posted by Customer
    A:
    Start by getting the Master Electrical Component List, which will show you where the Power Distribution Relay is located inside your car. Detach the relay from the harness by removing the attachments and removing any CPA or secondary locks from the relay. Be careful when removing the relay if it has been fastened or taped to the wiring harness. Once the relay comes out of the wire harness connector, connect the new one in its place, reattach any CPA devices or secondary locks, and hold the relay in place using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power distribution relay within the electrical center on Buick LaCrosse? Posted by Customer
    A:
    The first step for exchanging the power distribution relay inside the electrical center begins with removing the electrical center cover. Identify the relay while noting its correct position before securely placing the electrical center to avoid wire or terminal strain. Use the Relay Puller Pliers (J 43244) to position it across opposite corners of the relay before using the tool to draw the relay directly out from electrical center terminals since pliers or flat-bladed tools could potentially harm the electrical center. After removing the relay you must place the new one at the same spot while reinstalling the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power distribution relay within the electrical center on Buick Enclave? Posted by Customer
    A:
    Before starting protoecting electrical wires while you work on the power distribution relay the first step is to remove the electrical center cover to locate the relay then note its position before securing the electrical center to ensure wire and terminal safety. The J 43244 Relay Puller Pliers (J 43244) needs to be placed on opposing relay corners before extracting it straight out from the electrical center terminals. Rely on this tool instead of pliers or flat-bladed tools to protect the electrical center. After taking out the relay position it back according to its original placement before securing the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Headlight Relay on Cadillac DeVille? Posted by Customer
    A:
    The first step when servicing the headlamp relay is to open the hood then remove the protective cover from the underhood fuse block. You need to remove the high or low beam headlamp relay (3 or 4) from the underhood fuse block. You should install the high or low headlamp relay (3 or 4) into the underhood fuse block after which you should put on the protective cover and finish by closing the hood.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the reverse lamp relay on Cadillac Eldorado? Posted by Customer
    A:
    Begin by removing the rear seat back before removing the cover from the number 4 relay center to access the reverse lamp relay. Place the new reverse lamp relay into number 4 relay center after fitting the relay center cover and restoring the rear seat back.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the reverse lamp relay on Cadillac DeVille? Posted by Customer
    A:
    You should begin by removing the rear seat cushion followed by removing the protective cover from the rear fuse block before removing the reverse lamp Relay . Begin your replacement process by fitting the reverse lamp Relay followed by replacing the rear fuse block cover and finishing with seat cushion reinstallation.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the reverse lamp relay on Cadillac Seville? Posted by Customer
    A:
    The first step is to take out the rear seat cushion, and after that remove the rear fuse block cover so you can access the reverse lamp Relay . Now, take out the reverse lamp Relay from the fuse block at the back of the vehicle. For installing the Relay, insert it into the rear fuse block, cover up the fuse block, and finally fix the seat cushion in place.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service the Headlight Relay on Cadillac Seville? Posted by Customer
    A:
    Beginning the service of the headlamp relay requires you to open and support the hood and then remove the protective cover from the underhood fuse block. The service will start by removing the high beam headlamp relay or low beam headlamp relay from the underhood fuse block. The service procedure ends by installing the high beam headlamp relay or low beam headlamp relay into the underhood fuse block followed by protective cover reinstallation before hood closure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the relay attached to the wire harness on Chevrolet Avalanche 2500? Posted by Customer
    A:
    Look up the relay in the Master Electrical Component List before trying to replace it on the wire harness. Remove all fasteners holding the relay, make sure to take out any CPA devices or secondary locks, and do so slowly to prevent any damage when taking it off the connector. Once you have the relay, attach it to the connector on the wire harness, put any CPA devices or secondary locks back, and fasten the relay with either the original fasteners or some tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Chevrolet Cobalt? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay on the wire harness requires you to utilize the Master Electrical Component List for identifying its position. First disconnect all fasteners securing the relay then remove all Connector Position Assurance devices, secondary locks and other locking features. A gentle process needs to be used to disconnect the relay from its connector on the wire harness. The relay installation requires connecting it to the wire harness connector with proper reinstallation of any CPA devices or secondary locks followed by secure attachment using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power distribution relay within the electrical center on Chevrolet Malibu? Posted by Customer
    A:
    The replacement process for the electrical center power distribution relay begins with removal of its cover. Identify the relay position while checking its orientation before installing the electrical center to protect wire terminals from damage. Instert the Relay Puller Pliers (J 43244) between opposing relay corners before drawing it straight out from electrical center terminals to avoid damaging the electrical center with flat-bladed tools or pliers. Move the electrical center cover away before you place the new relay precisely where the removed one was located and you can reinstall the cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a relay within an electrical center on Chevrolet Suburban 1500? Posted by Customer
    A:
    Before you can replace a relay, remove the cover from the electrical center, spot the relay and keep a note on how it's positioned, making sure the electrical center is secured so you don't damage the wires. Position the tool that is the J 43244 Relay Puller Pliers (J 43 When you have removed the relay, fit in the new relay in the same spot and close the electrical center cover again.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Chevrolet Silverado 1500? Posted by Customer
    A:
    The Power Distribution Relay attached to the wire harness can be replaced after you use the Master Electrical Component List to identify its vehicle position. There should be a removal of the fasteners from the relay and one must be cautious to detach both CPA devices and secondary locks. The technician should carefully remove the relay from its connection on the wire harness. Reinstall the relay to its wire harness position by attaching it to the connector while reinserting any CPA equipment followed by installation of original fasteners or tape to secure the existing mounting method.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the relay attached to the wire harness on Chevrolet Suburban 2500? Posted by Customer
    A:
    Look up the relay in the Master Electrical Component List before trying to replace it on the wire harness. Remove all fasteners holding the relay, make sure to take out any CPA devices or secondary locks, and do so slowly to prevent any damage when taking it off the connector. Once you have the relay, attach it to the connector on the wire harness, put any CPA devices or secondary locks back, and fasten the relay with either the original fasteners or some tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power distribution relay within an electrical center on Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    The first step to replace the power distribution relay in an electrical center requires removal of the cover followed by locating the relay while noting its orientation and securely installing the electrical center to protect wires and terminals from damage. The J 43244 Relay Puller Pliers (J 43244) must be used for removing the relay from the electrical center by securing the tool to opposite relay corners. The J 43244 tool should be used to straightly pull out the relay since any damage to the electrical center can occur if you use pliers or flat-bladed tools. When installing the relay put it in its former position and then attach the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Chevrolet Tahoe? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay on the wire harness requires you to utilize the Master Electrical Component List for identifying its position. First disconnect all fasteners securing the relay then remove all Connector Position Assurance devices, secondary locks and other locking features. A gentle process needs to be used to disconnect the relay from its connector on the wire harness. The relay installation requires connecting it to the wire harness connector with proper reinstallation of any CPA devices or secondary locks followed by secure attachment using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a relay within an electrical center on Chevrolet S10? Posted by Customer
    A:
    The initial step to replace a relay inside an electrical center begins with removing the electrical center cover followed by consulting the Electrical Center Identification Views for locating the relay position. Note down how the relay is oriented before securing the electrical center to prevent wire and terminal damages. The Relay Puller Pliers (J 43244) enables users to extract the relay from electrical center terminals straight out by gripping two opposite points on the relay while plier or flat-bladed tools risk inflicting damage to the electrical center. When replacing the relay position it in the identical spot from where the old relay was extracted after you place back the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on Chevrolet Traverse? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay requires checking its location in the vehicle according to the Master Electrical Component List. First disconnect all fasteners and then separate the relay using a gentle motion while paying attention to remove any connector position assurance (CPA) devices and secondary locks. The relay needs to be gently disconnected from its connector position on the wire harness. Install the relay by reattaching it to the wire harness connector while reinstalling all CPA devices along with secondary locks before fastening it with original tape or fasteners from its previous placement.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on GMC Envoy? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay attached to the wire harness involves finding the relay and removing all its holding screws. Before installation you need to remove both Connector Position Assurance devices and secondary locks from the position. Wear caution to remove the relay from wire harness connector because the attachment may require precise handling of fasteners or tape. Installing the relay requires connecting it to the wire harness connector followed by CPA device and secondary lock reinstallation before using original fasteners or tape for security.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay attached to the wire harness involves finding the relay and removing all its holding screws. Before installation you need to remove both Connector Position Assurance devices and secondary locks from the position. Wear caution to remove the relay from wire harness connector because the attachment may require precise handling of fasteners or tape. Installing the relay requires connecting it to the wire harness connector followed by CPA device and secondary lock reinstallation before using original fasteners or tape for security.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power distribution relay within the electrical center on GMC Canyon? Posted by Customer
    A:
    Workers should begin power distribution relay replacement by first removing the electrical center cover then finding the relay ensuring they record its position before securely replacing the electrical center to protect wires and terminals. The J 43244 Relay Puller Pliers (J 43244) should be positioned on opposite relay sides before pulling the part directly out from electrical center terminals because using pliers or flat tools could harm the electronic center. Install the new relay exactly where the removed one was located and then put back the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on GMC Savana 3500? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay on the wire harness requires you to utilize the Master Electrical Component List for identifying its position. First disconnect all fasteners securing the relay then remove all Connector Position Assurance devices, secondary locks and other locking features. A gentle process needs to be used to disconnect the relay from its connector on the wire harness. The relay installation requires connecting it to the wire harness connector with proper reinstallation of any CPA devices or secondary locks followed by secure attachment using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Power Distribution Relay attached to the wire harness on GMC Terrain? Posted by Customer
    A:
    The first step to replace the Power Distribution Relay on the wire harness requires you to utilize the Master Electrical Component List for identifying its position. First disconnect all fasteners securing the relay then remove all Connector Position Assurance devices, secondary locks and other locking features. A gentle process needs to be used to disconnect the relay from its connector on the wire harness. The relay installation requires connecting it to the wire harness connector with proper reinstallation of any CPA devices or secondary locks followed by secure attachment using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    Q:
    What do you do after separating the relay from the wire harness connector for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Connect the new relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the final step after installing the new relay for the 2007 Buick Rainier? Posted by Customer
    A:
    Reinstall the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should you observe if the relay has a notch style for the 2010 Buick LaCrosse? Posted by Customer
    A:
    Observe the location of the notch on the old relay to ensure the new relay is installed in the same orientation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    Why should pliers or a flat-bladed tool be avoided when removing the relay for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Using pliers or a flat-bladed tool may damage the electrical center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should you do after connecting the relay for the 2002 Buick LeSabre? Posted by Customer
    A:
    Reinstall any CPA devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the final step after installing the new relay for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What tool should be used to remove the relay for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Use the J 43244 Relay Puller Pliers (J 43244).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the rear seat back for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Take off the cover from the number 4 relay center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the final step after installing the new relay for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the final step in the process for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Close the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Relay
    Q:
    What should be done with connector position assurance (CPA) devices for the 2008 Cadillac CTS? Posted by Customer
    A:
    Take out any CPA devices or secondary locks, exercising caution to avoid damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the next step after removing the protective cover for the 2001 Cadillac DeVille? Posted by Customer
    A:
    Remove the reverse lamp relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How should the relay be secured after installation for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Secure the relay using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in removing the relay for the 2009 Cadillac CTS? Posted by Customer
    A:
    Remove any fasteners securing the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the rear seat cushion for the 2000 Cadillac Seville? Posted by Customer
    A:
    Take off the rear fuse block cover to access the reverse lamp relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the installation process for the headlamp relay for the 2001 Cadillac Seville? Posted by Customer
    A:
    Place the high beam headlamp relay or the low beam headlamp relay back into the underhood fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Headlight Relay
    Q:
    How do you install the new relay for the 2007 Cadillac XLR? Posted by Customer
    A:
    Connect the relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you locate the Power Distribution Relay for the 2009 Cadillac XLR? Posted by Customer
    A:
    Use the Master Electrical Component List for guidance on its position in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you secure the relay after installation for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Secure the relay using the original fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you locate the relay attached to the wire harness for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Use the Master Electrical Component List to locate the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the final step after installing the new relay for the 2007 Cadillac XLR? Posted by Customer
    A:
    Reinstall the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in removing the relay for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Remove any fasteners securing the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the old relay for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    Install the new relay in the same position as the removed one.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    Connect the relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the relay within the electrical center for the 2007 Chevrolet Equinox? Posted by Customer
    A:
    First, remove the electrical center cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done with caution when detaching the relay for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Exercise caution when detaching the relay from the wiring harness, especially if it is secured by fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the power distribution relay for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the electrical center cover and locate the relay, noting its orientation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the old relay for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Install the new relay in the same position as the one removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you secure the relay after installation for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Secure the relay using the original fasteners or tape that held it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    Why should pliers or a flat-bladed tool be avoided when removing the relay for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Using pliers or a flat-bladed tool could damage the electrical center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you locate the Power Distribution Relay for the 2009 Chevrolet HHR? Posted by Customer
    A:
    Use the Master Electrical Component List for guidance on its position in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the relay within the electrical center for the 2010 Chevrolet Impala? Posted by Customer
    A:
    First, remove the electrical center cover and locate the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the Power Distribution Relay for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    First, locate the relay and remove any fasteners securing it in place, along with any connector position assurance (CPA) devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be exercised when detaching the relay from the wiring harness for the 2007 Chevrolet HHR? Posted by Customer
    A:
    Exercise caution, especially if it is secured by fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How should the relay be removed from the electrical center for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Position the tool on opposing corners of the relay and pull it straight out from the electrical center terminals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after connecting the relay for the 2007 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install any CPA devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Connect the relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be done after removing the old relay for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the new relay in the same position as the one removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in removing the relay for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove any fasteners securing the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step in the installation process for the 2007 GMC Acadia? Posted by Customer
    A:
    Connect the relay to the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you locate the Power Distribution Relay for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Use the Master Electrical Component List to identify its position in the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What should be exercised when detaching the relay from the wiring harness for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Exercise caution when detaching the relay, especially if it is secured by fasteners or tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What tool should be used to remove the relay for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the Relay Puller Pliers (J 43244) to position the tool on opposing corners of the relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you secure the relay after installation for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Secure the relay using the original fasteners or tape that held it in place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the next step after detaching the relay for the 2008 GMC Yukon? Posted by Customer
    A:
    Next, separate the relay from the wire harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the first step to replace the Power Distribution Relay for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    First, locate the relay and remove any fasteners securing it in place, along with any connector position assurance (CPA) devices or secondary locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Circuit Breaker 13500114 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 13500114 Circuit Breaker is available in the market under the name GM Relay, Headlight Relay. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 13500114 Circuit Breaker fits certain Chevrolet S10, Colorado, Tahoe models, as well as GMC Acadia, Sierra 1500, Yukon. Additionally, it is compatible with Cadillac Escalade, CTS, XLR and Buick Enclave, Regal, Encore models.
The original GM component designated by manufacturer part number 13500114 maintains top performance when functioning as the Relay Assembly, Accessory Time Delay *Gray; DRL, Rear Defroster, Multi-Purpose, Fog, Fuel Pump, Headlight, ABS, Flasher unit. The component 13500114 is constructed from durable material and its dimensions span 3.8 x 2.1 x 0.7 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Fusible Link; A/C, Fan, Control, Horn, Compressor, Main, ECM, Lock Relays; Module. The part 13500114 has available replacement options 12088567, 12135170, 19116057, 92199312, 12193606, 12135034, 19115080, 15328866, 15393412. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.