Make sure this part fits

GM 89040285
Brake Booster

2004-2008 GM

Customer Questions & Expert Answers (4)
GM 89040285 Brake Booster
  • Part Description
    Booster, Hydraulic Power Brake Booster
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number89040285
    Part DescriptionBooster, Hydraulic Power Brake Booster
    Other NamesBooster Assembly
    Item Dimensions11.9 x 16.0 x 11.5 inches
    Item Weight11.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU89040285
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2008 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
    2004-2008 GMC CanyonSL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 89040285 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 89040285 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Brake Booster on Chevrolet Colorado? Posted by Customer
    A:
    Start replacing the vacuum Brake Booster by taking off first the master cylinder assembly followed by the knee bolster trim panel. Remove the clips from the Brake Booster Pushrod and Pushrod itself. Then separate the clevis pin before detaching the Pushrod from the Brake Pedal. Unscrew the booster mounting nuts and remove the booster from the vehicle. Center the Brake Booster into the bulkhead space and screw its mounting nuts to 20 n.m (15 lb ft) torque setting. Reconnect the Pushrod with the Brake Pedal while placing the clevis pin through both components and the clip. Install the knee bolster trim panel and master cylinder assembly after you adjust both the stop lamp switch and cruise control release switch.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the vacuum brake booster on Chevrolet Colorado? Posted by Customer
    A:
    Start by detaching the master cylinder assembly and knee bolster trim panel. Start by pushing out the retaining clip of the Pushrod then pulling the clevis pin and finally sliding the Pushrod off the Brake Pedal. Take the Brake Booster out of the car after removing all its mounting nuts. Put the Brake Booster in its proper position at the bulkhead and use the mounting nuts to fasten it before tightening to 20 nm (15 ft. Lbs.). Secure the Pushrod back to the Brake Pedal by inserting the clevis pin and retainer clip at its end. First adjust the stop lamp switch and cruise control release switch then put back the master cylinder assembly and knee bolster trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the power vacuum brake booster on GMC Canyon? Posted by Customer
    A:
    Start by taking out the master cylinder system from its position. Pull down the knee bolster trim to access the Brake Booster Pushrod. Disconnect its retaining clip then both clevis pin and Pushrod from the Brake Pedal. Take off the booster mounting nuts and extract the booster from the vehicle. Position the Brake Booster inside the bulkhead and fasten it using mounting nuts before tightening them to 20 n.m (15 lb ft). Push the Brake Pedal Pushrod back into place and slide on its clevis pin. Secure both with the retaining clip. Adjust both switches after reinstalling the stop lamp switch and cruise control release switch. Complete the installation by placing back the knee bolster trim panel and the master cylinder assembly.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 89040285, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 89040285 Brake Booster. It is sometimes referred to as GM Brake Booster. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 89040285 Brake Booster. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery