Make sure this part fits

GM 22806493
Washer Pump

2003-2011 GM

Customer Questions & Expert Answers (16)
GM 22806493 Washer Pump
  • Part Description
    Pump, Headlamp Washer; Washer Pump Repair Kit; Windshield Washer Pump; Headlight Washer Pump
  • Replaces
    88958121
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22806493 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22806493 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the headlamp washer pump on Cadillac SRX? Posted by Customer
    A:
    The replacement of the Headlamp Washer Pump requires initial removal of lower air deflector and passenger side front wheelhouse liner. Begin by emptying out washer solvent from the container before disconnecting the electrical connector and washer hose from the rearward pump. Use one hand to hold the top of the washer pump before using a flat-bladed tool to disengage it from the washer solvent container and afterwards remove the pump along with the grommet. The installation process requires you to insert the washer pump grommet into the washer solvent container followed by applying clean water for lubricating the intake nozzle to make installation easier. The washer pump nozzle requires snapping into the washer solvent container until it becomes secure while the electrical connector and washer hose need reattachment to the pump. Replace the passenger side front wheelhouse liner followed by the lower air deflector. New washer solvent materials need addition into the washer solvent container before closing the hood.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the washer pump in place for the 2003 Cadillac CTS? Posted by Customer
    A:
    Reconnect the electrical connector and the washer hose to the washer pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    How do you remove the washer pump for the 2003 Cadillac CTS? Posted by Customer
    A:
    Hold the top of the washer pump with one hand and use a flat-bladed tool to pry it from the washer solvent container, then remove the washer pump and discard the washer pump grommet.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What should be done to the washer pump intake nozzle before installation for the 2005 Cadillac CTS? Posted by Customer
    A:
    Lubricate the washer pump intake nozzle with washer solvent to facilitate its insertion into the washer container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step in the installation of the new washer pump for the 2007 Cadillac CTS? Posted by Customer
    A:
    Place the new washer pump grommet into the washer solvent container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What should be disconnected from the washer pump for the 2005 Cadillac CTS? Posted by Customer
    A:
    Disconnect the washer hose and the electrical connector from the washer pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step in the installation of the new washer pump for the 2004 Cadillac CTS? Posted by Customer
    A:
    Place the new washer pump grommet into the washer solvent container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    How is the washer pump removed for the 2006 Cadillac CTS? Posted by Customer
    A:
    Remove the washer pump from the washer solvent container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What should be done with the washer solvent for the 2004 Cadillac SRX? Posted by Customer
    A:
    Drain the washer solvent into a suitable container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step to replace the headlamp washer pump for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the lower air deflector and the passenger side front wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step to replace the Windshield Washer Pump for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the lower air deflector and the passenger side front wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What should be done to the washer pump intake nozzle before installation for the 2005 Cadillac SRX? Posted by Customer
    A:
    Lubricate the washer pump intake nozzle with washer solvent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What should be done after securing the washer pump in place for the 2008 Cadillac SRX? Posted by Customer
    A:
    Reconnect the electrical connector and the washer hose to the washer pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    How should the washer pump intake nozzle be prepared for installation for the 2007 Cadillac SRX? Posted by Customer
    A:
    Lubricate the washer pump intake nozzle with clean water to facilitate installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    Q:
    What is the first step to replace the headlamp washer pump for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the lower air deflector and the passenger side front wheelhouse liner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Washer Pump
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Washer Pump 22806493 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22806493 Washer Pump is available in the market under the name GM Washer Pump. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22806493 Washer Pump fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 22806493 maintains top performance when functioning as the Pump, Headlamp Washer; Washer Pump Repair Kit; Windshield Washer Pump; Headlight Washer Pump unit. The component 22806493 is constructed from durable material and its dimensions span 7.4 x 4.1 x 4.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pump, Capsule/Headlamp Washer/Wiper. The part 22806493 has available replacement options 88958121. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.