Make sure this part fits

GM 88956900
Water Outlet

2004-2009 GM

Customer Questions & Expert Answers (15)
GM 88956900 Water Outlet
  • Part Description
    Hose Assembly, Radiator Surge Tank Engine; Radiator Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2009, 2004-2007 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88956900 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88956900 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What do you do after installing the O-ring seals for the 2004 Cadillac CTS? Posted by Customer
    A:
    Insert the coolant outlet pipe into the thermostat housing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after loosely assembling the coolant pipe bolts for the 2005 Cadillac CTS? Posted by Customer
    A:
    Install the coolant pipe to thermostat bolt and tighten it to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How should the cooling system be drained for the 2007 Cadillac CTS? Posted by Customer
    A:
    Use the appropriate procedures for the specific model.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What do you do after removing the bolt for the 2007 Cadillac CTS? Posted by Customer
    A:
    Take out the coolant outlet pipe from the thermostat housing and discard the O-ring seals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be disconnected next for the 2004 Cadillac CTS? Posted by Customer
    A:
    Disconnect the heated oxygen sensor connector from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the first step to replace the Engine Coolant Inlet Pipe (LY7) for the 2005 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you detach the surge tank outlet hose from the thermostat assembly for the 2005 Cadillac SRX? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) again to detach it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What is the next step after removing the bolts for the 2006 Cadillac SRX? Posted by Customer
    A:
    Take out the coolant pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you install the new surge tank outlet hose/pipe for the 2007 Cadillac SRX? Posted by Customer
    A:
    Position the surge tank outlet hose/pipe back into the engine compartment, compress the clamp, and connect the surge tank outlet hose to the heater hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    From where should the surge tank inlet hose be removed for the 2004 Cadillac SRX? Posted by Customer
    A:
    From the surge tank, radiator, and throttle body assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be connected to the coolant pipe after installation for the 2009 Cadillac SRX? Posted by Customer
    A:
    Connect the radiator outlet hose to the coolant pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you remove the surge tank outlet hose from the heater hose for the 2005 Cadillac STS? Posted by Customer
    A:
    Compress the clamp to remove the surge tank outlet hose from the heater hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    How do you detach the surge tank outlet hose from the thermostat assembly for the 2007 Cadillac STS? Posted by Customer
    A:
    Use the Hose Clamp Pliers (J 38185) to detach the surge tank outlet hose from the thermostat assembly and remove it from the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    Q:
    What should be done after loosely assembling the coolant pipe bolts for the 2007 Cadillac STS? Posted by Customer
    A:
    Install the coolant pipe to thermostat bolt and tighten it to 23 N.m (17 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Coolant Pipe
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Water Outlet 88956900 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88956900 Water Outlet is available in the market under the name GM Cooling Hose, Coolant Pipe. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88956900 Water Outlet fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 88956900 maintains top performance when functioning as the Hose Assembly, Radiator Surge Tank Engine; Radiator Hose unit. The component 88956900 is constructed from durable material and its dimensions span 20.9 x 15.6 x 5.6 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Outlet Hose; Hose, Engine Coolant Recovery. The part 88956900 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.