How to Replace the Throttle Body Heater Hose Connected to the Coolant Pipe on Chevrolet Malibu?

First, remove the throttle body air inlet duct and drain the cooling system in order to allow replacing the throttle body heater hose. Then, unscrew the throttle body inlet hose clamp and hose off the coolant pipe and after that unscrew the drip of throttle body clamp and hose and remove throttle body inlet hose. For Installation, it starts with the installation of the new throttle body inlet hose, then you attach the hose and clamp to the throttle body followed by application of securing the hose and clamp to the said coolant pipe. Finally, refuel the cooling system and put back the throttle body air inlet duct.

How to replace the Coolant Pipe for the Radiator Surge Tank Inlet (Non-HP2) on Chevrolet Tahoe?

Make sure to first drain the cooling system before replacing the Radiator surge tank inlet hose/pipe (Non-HP2). At this point, switch the surge tank inlet hose clamp to the surge tank and take the surge tank inlet hose off the Radiator. After that, place the surge tank inlet hose clamp onto the surge tank and take off the surge tank inlet hose. The first thing to do is put the surge tank inlet hose onto the surge tank and secure it with the surge tank inlet hose clamp. After this, connect the surge tank inlet hose to the Radiator and put the surge tank inlet hose clamp onto the Radiator. Finally, fill the cooling system.

How to replace the surge tank inlet coolant pipe on Chevrolet SSR?

In order to replace the surge tank inlet hose, you must drain out your cooling system. The iicjose cl10m pliers (J 38185) should be used to release tension to reposition the surge tank inlet hose clamp at the surge tank, then remove the surge tanker se inlet hose from the surge tank. Then, release tension and move the clamp to the Radiator and then disconnect the surge tank inlet hose from the Radiator. Take off the surge tank inlet hose assembly of the vehicle. For installing, lubricate the inside diameters of the hoses with clean coolant before hooking the surge tank inlet hose to the surge tank inlet hose tee at the proper place. Then install the surge tank inlet hose to the Radiator with a new hose clamp. Finally, fill the cooling system.

OEM Chevrolet Coolant Pipe

Engine Cooler Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

482 Coolant Pipes found

View related parts
Chevrolet Air Hose
Part Number: 12602544
$57.94 MSRP: $103.46
You Save: $45.52 (44%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Coolant By-Pass; Multi Purpose Hose; Radiator Hose; Cooling Hose; Air Tube; Air Pipe; Hose; Pipe; Pipe, Engine Coolant By - Pass
- Replaces: 12568478, 12562169, 12578838, 12578839, 12581213
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Inlet Hose
Part Number: 15868160
$208.30 MSRP: $311.36
You Save: $103.06 (34%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Inlet; Radiator Hose; Hose, Engine Coolant Recovery
Fits the following Chevrolet Models:
- Corvette | 2009-2013 | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Hose
Part Number: 10229491
$23.32 MSRP: $34.68
You Save: $11.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Multi Purpose Hose; Cooling Hose
Fits the following Chevrolet Models:
- Corvette | 1997-2004 | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Inlet Hose
Part Number: 25835263
$42.17 MSRP: $62.76
You Save: $20.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2007-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2007-2010 | LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Inlet Tube
Part Number: 23495414
$114.14 MSRP: $161.76
You Save: $47.62 (30%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Inlet; Intercooler Hose; Hose; Hose, Engine Coolant Recovery
- Replaced by: 19540540
- Replaces: 23127906, 23127907
Fits the following Chevrolet Models:
- Corvette | 2014-2019 | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Engine Coolant Air Bleed Hose
Part Number: 84390533
$20.00 MSRP: $32.91
You Save: $12.91 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly Engine Coolant Air Bleed; Hose, Engine Coolant By - Pass
- Replaces: 84129282
Fits the following Chevrolet Models:
- Equinox | 2018-2019 | L, LS, LT, Premier | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Water Return Tube
Part Number: 12670755
$56.64 MSRP: $96.43
You Save: $39.79 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Turbocharger/Supercharger Air/Vacuum/Cooling; Coolant Pipe
- Replaces: 12662518
Fits the following Chevrolet Models:
- Malibu | 2016-2024 | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Connector Hose
Part Number: 12634280
$8.80 MSRP: $13.79
You Save: $4.99 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant By-Pass; Reservoir Hose; Hose, Engine Coolant By - Pass
Fits the following Chevrolet Models:
- Malibu | 2013-2022 | LT, LTZ, Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Overflow Hose
Part Number: 22875329
$40.98 MSRP: $60.99
You Save: $20.01 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Surge Tank Inlet; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Hose, Engine Coolant Recovery
Fits the following Chevrolet Models:
- Impala | 2016-2019 | LS, LT, LTZ | 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS
- Malibu | 2013-2015 | LT, LTZ | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Reservoir Hose
Part Number: 25952834
$40.98 MSRP: $60.98
You Save: $20.00 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Coolant Recovery Reservoir Outlet; Coolant Reservoir Hose; Multi Purpose Hose; Hose, Engine Coolant Recovery
Fits the following Chevrolet Models:
- Equinox | 2010-2017 | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Inlet Hose
Part Number: 85119167
$49.77 MSRP: $74.07
You Save: $24.30 (33%)
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery
- Replaced by: 85056538
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L FLEX, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Inlet Hose
Part Number: 84010625
$14.65 MSRP: $21.80
You Save: $7.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose
Fits the following Chevrolet Models:
- Silverado 1500 | 2016-2018 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet By-Pass Hose Elbow
Part Number: 24001336
$6.75 MSRP: $10.05
You Save: $3.30 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Thermostat Bypass; By-Pass Hose; Hose, Engine Coolant By - Pass
Fits the following Chevrolet Models:
- Silverado 1500 | 2023 | Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, RST | 6 Cyl 3.0 L DIESEL
View related parts
Chevrolet Inlet Hose
Part Number: 84013642
$50.23 MSRP: $74.75
You Save: $24.52 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose; Reservoir Hose; Overflow Hose
Fits the following Chevrolet Models:
- Camaro | 2016-2024 | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Upper Hose
Part Number: 85135100
$76.23 MSRP: $113.44
You Save: $37.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Radiator Inlet; Hose, Radiator Inlet (Upper)
- Replaces: 23416970
Fits the following Chevrolet Models:
- Malibu | 2016-2022 | LT, Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Upper Hose
Part Number: 84890761
$21.72 MSRP: $33.98
You Save: $12.26 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Radiator Inlet; Hose, Radiator Inlet (Upper)
- Replaces: 22832913, 84393404, 23315496
Fits the following Chevrolet Models:
- Camaro | 2016-2023 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Inlet Hose
Part Number: 84890763
$62.80 MSRP: $93.45
You Save: $30.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Reservoir Hose
- Replaces: 84727330, 22908202
Fits the following Chevrolet Models:
- Camaro | 2016-2023 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet By-Pass Hose, Driver Side
Part Number: 25952879
$49.63 MSRP: $95.50
You Save: $45.87 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery
- Position: Driver Side
Fits the following Chevrolet Models:
- Equinox | 2010-2017 | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Overflow Hose, Driver Side
Part Number: 22962116
$28.69 MSRP: $42.71
You Save: $14.02 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Position: Driver Side
- Replaces: 20809015
Fits the following Chevrolet Models:
- Impala | 2014-2020 | LS, LT, LTZ, Premier | 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Reservoir Hose
Part Number: 84369166
$38.93 MSRP: $57.93
You Save: $19.00 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Water Pump Inlet; Multi Purpose Hose; Hose, Engine Coolant By - Pass
Fits the following Chevrolet Models:
- Corvette | 2020-2024 | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS

| Page 1 of 25 |Next >

1-20 of 482 Results

Chevrolet Coolant Pipe Parts Questions & Experts Answers

Coolant Hose
22622876
Q: How to Replace the Throttle Body Heater Hose Connected to the Coolant Pipe on Chevrolet Malibu?
A: First, remove the throttle body air inlet duct and drain the cooling system in order to allow replacing the throttle body heater hose. Then, unscrew the throttle body inlet hose clamp and hose off the coolant pipe and after that unscrew the drip of throttle body clamp and hose and remove throttle body inlet hose. For Installation, it starts with the installation of the new throttle body inlet hose, then you attach the hose and clamp to the throttle body followed by application of securing the hose and clamp to the said coolant pipe. Finally, refuel the cooling system and put back the throttle body air inlet duct.
Inlet Hose
22827733
Q: How to replace the Coolant Pipe for the Radiator Surge Tank Inlet (Non-HP2) on Chevrolet Tahoe?
A: Make sure to first drain the cooling system before replacing the Radiator surge tank inlet hose/pipe (Non-HP2). At this point, switch the surge tank inlet hose clamp to the surge tank and take the surge tank inlet hose off the Radiator. After that, place the surge tank inlet hose clamp onto the surge tank and take off the surge tank inlet hose. The first thing to do is put the surge tank inlet hose onto the surge tank and secure it with the surge tank inlet hose clamp. After this, connect the surge tank inlet hose to the Radiator and put the surge tank inlet hose clamp onto the Radiator. Finally, fill the cooling system.
Upper Hose
15106778
Q: How to replace the surge tank inlet coolant pipe on Chevrolet SSR?
A: In order to replace the surge tank inlet hose, you must drain out your cooling system. The iicjose cl10m pliers (J 38185) should be used to release tension to reposition the surge tank inlet hose clamp at the surge tank, then remove the surge tanker se inlet hose from the surge tank. Then, release tension and move the clamp to the Radiator and then disconnect the surge tank inlet hose from the Radiator. Take off the surge tank inlet hose assembly of the vehicle. For installing, lubricate the inside diameters of the hoses with clean coolant before hooking the surge tank inlet hose to the surge tank inlet hose tee at the proper place. Then install the surge tank inlet hose to the Radiator with a new hose clamp. Finally, fill the cooling system.