How to replace the drive belt on Chevrolet Colorado?

A 3/8 inch breaker bar should be used to rotate the Drive Belt tensioner clockwise until tension in the Drive Belt disappears. Pull off the Drive Belt from the Water Pump Pulley then let the tensioner restore to its natural state before extracting the Drive Belt from all remaining pulleys. When installing the Drive Belt you should direct it across all pulleys except the Water Pump Pulley before applying the breaker bar for a clockwise rotation of the tensioner. You should position the Drive Belt above the Water Pump Pulley before you gradually reduce tension from the Drive Belt tensioner . Check that the Drive Belt fits correctly into the groove patterns of the drive pulleys and inspect the Drive Belt installation on each pulley.

How to Replace and Install a Drive Belt Using the J 44811 Tool on Chevrolet Malibu?

The drive belt replacement process starts by taking out the front fender liner. The Accessory Belt Tensioner Unloader (J 44811) should be used to turn the drive belt tensioner counter-clockwise which leads to spring tension relief before belt removal. You should employ the Accessory Belt Tensioner Unloader (J 44811) to turn the belt tensioner clockwise to clear the spring tension when installing the new drive belt. presentation of the front fender liner completes the installation process.

How to replace the Drive Belt for the Air Conditioning Compressor on a V8 engine on Chevrolet Tahoe?

Starting the replacement process for the v8 engine air conditioning compressor belt requires users to remove the accessory Drive Belt alongside the skid plate. The old rubber belt needs to be cut from both the air conditioning unit and crankshaft pulleys. Position the new belt behind the rear side of the balancer and beyond the a/c pulley. Hook the belt installation tool to the balancer and then raise it to attach the belt onto the tool. After sliding the tool downward you will position the belt onto the air conditioning pulley while applying gentle tension on it. Let the front section of the belt expose its parts with ribs because of the facing direction it needs to follow. Use clock-wise Crankshaft Pulley rotation together with finger pressure at the belt to pull it forward until the ribbed side rests directly in front of the a/c pulley. To verify Drive Belt installation inspect it while rotating the balancer 360 degrees more. Finally place back the skid plate and accessory Drive Belt and install them correctly.

OEM Chevrolet Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

297 Drive Belts found

View related parts
Chevrolet A/C Belt
Part Number: 12685983
$16.71 MSRP: $29.13
You Save: $12.42 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt; Belt
- Replaces: 12643219
Fits the following Chevrolet Models:
- Camaro | 2016-2024 | LT1, SS, ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12569527
$32.80 MSRP: $56.07
You Save: $23.27 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12561860, 12562626
Fits the following Chevrolet Models:
- Camaro | 1998-2002 | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12636138
$43.31 MSRP: $77.35
You Save: $34.04 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt
- Replaces: 12576747, 12569434
Fits the following Chevrolet Models:
- Avalanche 2500 | 2002-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
- Captiva Sport | 2012 | LT, LTZ | 6 Cyl 3.0 L FLEX
- Equinox | 2010-2017 | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Silverado 2500 HD | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 2500 HD Classic | 2007 | LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 3500 | 2001-2006 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
- Silverado 3500 Classic | 2007 | LS, LT, WT | 8 Cyl 8.1 L GAS
- Suburban 2500 | 2001-2006 | Base, LS, LT | 8 Cyl 8.1 L GAS
View More
View related parts
Chevrolet Serpentine Belt
Part Number: 12577771
$39.59 MSRP: $70.70
You Save: $31.11 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
Fits the following Chevrolet Models:
- Malibu | 2006-2010 | LS, LT, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12637200
$57.36 MSRP: $102.42
You Save: $45.06 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12576448
Fits the following Chevrolet Models:
- Avalanche | 2009 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
- Silverado 1500 | 2009-2013, 2005-2006 | Hybrid, LT, LTZ | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS
- Silverado 1500 Classic | 2007 | Hybrid | 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
- Silverado 2500 HD | 2009-2010 | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Silverado 3500 HD | 2009-2010 | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
- Tahoe | 2008-2013 | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View More
View related parts
Chevrolet Serpentine Belt
Part Number: 12576572
$47.42 MSRP: $84.68
You Save: $37.26 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Fan, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit.; Belt, Drive
- Replaces: 12564762
Fits the following Chevrolet Models:
- Astro | 2005 | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12569435
$20.53 MSRP: $71.75
You Save: $51.22 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Belt, Drive
Fits the following Chevrolet Models:
- Express 3500 | 2001-2002 | Base, LS | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12569436
$31.43 MSRP: $71.92
You Save: $40.49 (57%)
ADD TO CART
Product Specifications
- Other Name: Belt-Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Fan Belt
Fits the following Chevrolet Models:
- Express 3500 | 2001-2002 | Base, LS | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12732705
$42.41 MSRP: $86.69
You Save: $44.28 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Accessory Drive Primary; Belt, Drive
- Replaces: 12675893
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2020-2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2020-2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Drive Belt
Part Number: 12717890
$26.19 MSRP: $51.77
You Save: $25.58 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Accessory Drive Auxiliary; Belt, Drive
- Replaced by: 12732424
Fits the following Chevrolet Models:
- Silverado 2500 HD | 2024 | Custom, High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
- Silverado 3500 HD | 2024 | High Country, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Serpentine Belt
Part Number: 12649156
$64.77 MSRP: $115.66
You Save: $50.89 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Fan; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 98064079
Fits the following Chevrolet Models:
- Express 2500 | 2010-2016 | Base | 8 Cyl 6.6 L DIESEL
- Express 3500 | 2010-2016 | Base, LS, LT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Serpentine Belt
Part Number: 88986808
$27.32 MSRP: $51.32
You Save: $24.00 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump & A/C Compressor & Generator & Power Steering Pump; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 24575310, 10224380
Fits the following Chevrolet Models:
- Beretta | 1995-1996, 1991 | Base | 4 Cyl 2.2 L GAS
- Cavalier | 1991-1997 | Base, LS, RS, VL | 4 Cyl 2.2 L GAS
- Corsica | 1995-1996 | Base | 4 Cyl 2.2 L GAS
View More
View related parts
Chevrolet Serpentine Belt
Part Number: 19316080
$28.03 MSRP: $50.06
You Save: $22.03 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
Fits the following Chevrolet Models:
- City Express | 2015-2018 | LS, LT | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 19355375
$39.34 MSRP: $81.59
You Save: $42.25 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Fan Belt
- Replaces: 24502138, 88986816, 24501203, 24502761, 12555073
Fits the following Chevrolet Models:
- Express 3500 | 1996-2000 | Base, LS | 8 Cyl 7.4 L GAS
- P30 | 1996-1999 | Base | 8 Cyl 7.4 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12664598
$19.05 MSRP: $34.02
You Save: $14.97 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Replaces: 12652186
Fits the following Chevrolet Models:
- Blazer | 2019-2021 | Base, L, LT | 4 Cyl 2.5 L GAS
- Camaro | 2016-2023 | LS, LT | 4 Cyl 2.0 L GAS
- Colorado | 2015-2022 | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS
- Equinox | 2018-2020 | LT, Premier | 4 Cyl 2.0 L GAS
- Malibu | 2016-2022 | LT, Premier | 4 Cyl 2.0 L GAS
- Traverse | 2018-2019 | RS | 4 Cyl 2.0 L GAS
View More
View related parts
Chevrolet A/C Belt
Part Number: 12669975
$47.64 MSRP: $85.10
You Save: $37.46 (45%)
Product Specifications
- Other Name: Belt Kit, Drive; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt
Fits the following Chevrolet Models:
- Silverado 1500 | 2016-2018 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 14102101
Product Specifications
- Other Name: Belt-Fan & Air Injection Pump & Generator; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
Fits the following Chevrolet Models:
- Astro | 1987-1989 | Base, CL, CS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12569438
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Fan Belt
Fits the following Chevrolet Models:
- Express 3500 | 2001-2002 | Base, LS | 8 Cyl 8.1 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 10186198
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
Fits the following Chevrolet Models:
- Corvette | 1992-1993 | 40th Anniversary Edition, Base | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Serpentine Belt
Part Number: 12569439
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Fan Belt
- Replaces: 12559619
Fits the following Chevrolet Models:
- Express 3500 | 2001-2002 | Base, LS | 8 Cyl 8.1 L GAS

| Page 1 of 15 |Next >

1-20 of 297 Results

Chevrolet Drive Belt Parts Questions & Experts Answers

Serpentine Belt
12611636
Q: How to replace the drive belt on Chevrolet Colorado?
A: A 3/8 inch breaker bar should be used to rotate the Drive Belt tensioner clockwise until tension in the Drive Belt disappears. Pull off the Drive Belt from the Water Pump Pulley then let the tensioner restore to its natural state before extracting the Drive Belt from all remaining pulleys. When installing the Drive Belt you should direct it across all pulleys except the Water Pump Pulley before applying the breaker bar for a clockwise rotation of the tensioner. You should position the Drive Belt above the Water Pump Pulley before you gradually reduce tension from the Drive Belt tensioner . Check that the Drive Belt fits correctly into the groove patterns of the drive pulleys and inspect the Drive Belt installation on each pulley.
Serpentine Belt
12577771
Q: How to Replace and Install a Drive Belt Using the J 44811 Tool on Chevrolet Malibu?
A: The drive belt replacement process starts by taking out the front fender liner. The Accessory Belt Tensioner Unloader (J 44811) should be used to turn the drive belt tensioner counter-clockwise which leads to spring tension relief before belt removal. You should employ the Accessory Belt Tensioner Unloader (J 44811) to turn the belt tensioner clockwise to clear the spring tension when installing the new drive belt. presentation of the front fender liner completes the installation process.
Serpentine Belt
12626222
Q: How to replace the Drive Belt for the Air Conditioning Compressor on a V8 engine on Chevrolet Tahoe?
A: Starting the replacement process for the v8 engine air conditioning compressor belt requires users to remove the accessory Drive Belt alongside the skid plate. The old rubber belt needs to be cut from both the air conditioning unit and crankshaft pulleys. Position the new belt behind the rear side of the balancer and beyond the a/c pulley. Hook the belt installation tool to the balancer and then raise it to attach the belt onto the tool. After sliding the tool downward you will position the belt onto the air conditioning pulley while applying gentle tension on it. Let the front section of the belt expose its parts with ribs because of the facing direction it needs to follow. Use clock-wise Crankshaft Pulley rotation together with finger pressure at the belt to pull it forward until the ribbed side rests directly in front of the a/c pulley. To verify Drive Belt installation inspect it while rotating the balancer 360 degrees more. Finally place back the skid plate and accessory Drive Belt and install them correctly.