Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
Replaces: 12569437
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 8.1 L GAS
Chevrolet Silverado 3500 Drive Belt
Our website offers an extensive catalog of genuine Chevrolet Silverado 3500 Drive Belt at unbeatable prices. Every OEM Chevrolet Silverado 3500 Drive Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 3500 Drive Belt Parts Questions & Experts Answers
Q: How to replace the air conditioning drive belt on Chevrolet Silverado 3500?
A: One should start by removing both the accessory Drive Belt and supporting the raised vehicle before starting the air conditioning Drive Belt replacement process. Begin by removing both the engine shielding bolts before removing the shield. You should utilize a ratchet inside the a/c belt tensioner adapter port to pivot the tensioner clockwise thus releasing belt tension before removing the a/c belt from each pulley. Remove the ratchet after softly releasing the a/c belt tensioner tension and clean all pulley belt surfaces. Put the a/c belt over the crankshaft balancer and apply the ratchet to the a/c Drive Belt tensioner adapter opening to reduce tension during installation. Install the a/c belt across the pulley of the idler before moving it onto the a/c compressor pulley then proceed to gently release tension on the a/c belt tensioner by removing the ratchet. The engine shield installation requires proper mounting of the a/c belt and correct alignment before securing the bolts with a torque of 20 nm (15 ft. Lbs.). You should finally lower the vehicle and put back the accessory Drive Belt.