Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; A/C Belt; Belt, Drive
Replaces: 12569346, 12554028
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Chevrolet Avalanche 1500 Drive Belt
Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Drive Belt at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Drive Belt comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Avalanche 1500 Drive Belt Parts Questions & Experts Answers
Q: How to replace the drive belt on Chevrolet Avalanche 1500?
A: First loosen the air cleaner outlet duct clamps positioned at the Throttle Body and maf/iat sensor component before disconnecting the radiator inlet hose clip from the outlet duct and eliminating the air cleaner outlet duct. A breaker bar fitted with a hex-head socket enables users to turn the Drive Belt tensioner bolt clockwise for belt tension release. Release the Drive Belt tensioner first by loosening its clamp then remove the belt from all pulleys and the tensioner. Next slowly release the tensioner pressure using the breaker bar before removing it along with the matching socket. Inspect all belt surfaces on the existing pulleys before directing the Drive Belt through all other pulleys except the idler pulley. The breaker bar with hex-head socket goes back on the tensioner bolt for relief when rotating it clockwise to buckle in the Drive Belt which gets placed under the idler pulley. After removing the socket and breaker bar the tension on the belt tensioner can be carefully relaxed. The Drive Belt must be inspected for correct positioning and alignment before installing the air cleaner outlet duct with its arrow facing the Throttle Body attaching stud. Reconnect the radiator inlet hose clip before securing all three air cleaner outlet duct clamp screws at their respective locations to 7 nm (62 inch lbs.).